Cecotec Bolero DressCode 9800 Inverter Steel A Handleiding (398 Pagina's)

Handleiding

/ 398

Je bekijkt pagina 133 van 398

BOLERO DRESSCODE 9800 INVERTER A/ STEEL 133

ENGLISH

U4 Door lock fault The door is not closed

properly and the door lock

does not function normally.

Close the door again, turn the

wash cycle selector to the

“OFF” position to turn o the

power supply, and then turn

the selector to select any

wash programme and press

the START/PAUSE button

to restart the programme.

Eliminate the causes of this

failure. If the fault code still

exists, please contact the

Cecotec Technical Support.

If the fault code appears and

you cannot open the door,

the door lock may be faulty,

please contact Cecotec

Technical Support.

H Drum temperature is high Press the START/PAUSE

button to suspend operation

of the appliance and wait

a few minutes. When the

temperature in the drum

drops to a safe range

and the fault code on the

display is cleared, press

the START/PAUSE button to

continue with the rest of the

programme. If the fault code

still exists, please contact the

Cecotec Technical Support.

EXX Other errors Turn the selector switch to

turn o the appliance, unplug

the power cord and contact

Cecotec Technical Support.

Note: Be sure to check the cause of the fault and clear the fault before pressing the START/

PAUSE button again. If the fault code is cleared, the appliance will continue to operate, and

/ 398

Bekijk gratis de handleiding van Cecotec Bolero DressCode 9800 Inverter Steel A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.