Cecotec Bolero DressCode 9800 Inverter Steel A Handleiding (398 Pagina's)

Handleiding

/ 398

Je bekijkt pagina 12 van 398

BOLERO DRESSCODE 9800 INVERTER A/ STEEL12

this manual and all water, drain, electrical and grounding

connections comply with all applicable local regulations

and/or other requirements.

- Before carrying out any maintenance or cleaning in the

device, unplug the appliance from the mains.

- As a safety measure, we advise you to unplug the

appliance and cut the water supply after every use.

Maximum water-inlet pressure: 1 MPa. Minimum water-

inlet pressure: 0.03 MPa.

- Never unplug the appliance with wet hands.

- To ensure your safety, power plug must be inserted into

an earthed three-pole socket. Check carefully and make

sure that your socket is properly and reliably earthed.

- It must be possible to disconnect the appliance from the

power supply by unplugging it if the plug is accessible, or

by means of an all-pole switch upstream of the plug, in

accordance with national electrical safety regulations.

- The maximum current of the device is 10 A, make sure

that the power supply system (voltage, current and cable)

is applicable to the load of the device.

- Make sure that the socket outlet is capable of supporting

the Maximum Power rating of the appliance as indicated

on the rating plate.

- Water and electrical devices must be connected

by a qualied technician in accordance with the

manufacturer’s instructions and local safety regulations.

- The glass door may reach high temperatures during

operation. Keep children and pets away from the glass

door. Never open the door during the washing stage.

- Do not operate the device in very wet rooms or in rooms

/ 398

Bekijk gratis de handleiding van Cecotec Bolero DressCode 9800 Inverter Steel A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.