Cecotec Bolero DressCode 9800 Inverter Steel A handleiding

398 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 106 van 398
BOLERO DRESSCODE 9800 INVERTER A/ STEEL106
ENGLISH
- Before washing the clothes for the rst time, the product shall be operated in one
round of the whole procedures without the clothes inside.
- Make sure that all pockets are empty. Sharp and rigid items such as coins, brooches,
nails, screws or stones may cause serious damage to this machine.
3. PRODUCT INSTALLATION
1. Place the device on a at, stable and dry surface. Make sure the product does not
stand on the power cord.
2. Never install it on a soft carpet or wooden oor, or on any kind of mezzanine.
3. The washer may move a little during operation due to overload factors.
4. Avoid direct sunlight and ensure sucient ventilation.
5. Keep the room environment dry and avoid humidity.
6. Remove the cardboard box and Styrofoam packing.
7. Free the power cable and the drain hose from the rear.
8. Remove any accessories that may be inside the drum, such as the water supply hose,
instruction manual, etc.
9. The washing machine should be operated within a temperature range of 5-40 °C. If
used under 0°C, the inlet valve and draining system may be damaged.
10. Install the appliance ensuring sucient space around it (Fig. 4):
a: minimum 3 cm.
b: minimum 5 cm.
c: minimum 5 cm on the left side.
d: minimum 5 cm on the right side.
e: minimum 70 cm.
WARNING: Do not allow metal parts of the appliance to come into contact with metal sinks
or other appliances.
Removing the transport screws (Fig. 3)
- The transport bolts must be removed from the backside of the device before using it.
- IMPORTANT: it is imperative to remove the transport screws before the rst use,
otherwise they may damage the drum during the operation of the device.
- The transport screws will be necessary again when moving the product, so make sure
they are kept in a safe place.
- In order to remove the screws:

Bekijk gratis de handleiding van Cecotec Bolero DressCode 9800 Inverter Steel A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCecotec
ModelBolero DressCode 9800 Inverter Steel A
CategorieWasmachine
TaalNederlands
Grootte36706 MB