Cecotec Bolero DressCode 8900 Inverter A handleiding

Wasmachine

Cecotec

468 pagina's

PDF beschikbaar

Handleiding

/ 468

Je bekijkt pagina 127 van 468

Bolero DressCode 8900 Inverter FullColor A

Bolero DressCode 8900 Inverter FullColor Steel A

Bolero DressCode 8900 Inverter FullColor Ice Blue A

127

ENGLISH

- If the selected option is incompatible with a previously congured option, only the most

recent selection shall remain active.

5. Add detergent

- Remove the detergent dispenser and add detergent and fabric softener (if applicable) into

the corresponding compartments as described in gure 17.

- Compartment 1: detergent powder

- Compartment 2: liquid detergent (must not exceed the level marked MAX).

- Compartment 3: additives such as softener (must not exceed the level marked MAX).

- Observe the dosage recommendations of the detergent/softener manufacturer.

- The correct dosage of detergent/softener is important because:

- Optimises the cleaning result.

- Avoid excess detergent residues in your laundry, which can cause skin irritations.

- Saves money by avoiding waste of leftover detergent.

- Protects the washing machine preventing calcication of the components.

- It respects the environment by avoiding unnecessary environmental burdens.

- Do not use detergents for hand washing as they create too much foam!

- Use powder detergent for cotton whites, for pre-washing and for washing at a temperature

- over 60 °C!

- When using concentrated, stringy or additive detergent, before pouring it into the detergent

drawer, it is recommended to use water to dilute it slightly in order to avoid clogging the

detergent drawer inlet or water leaking out when lling the drawer.

6. Delayed end

If desired, use this function to end a programme at the programmed time.

7. Start-up programme

- Press the START/PAUSE icon . The corresponding indicator light will illuminate, the door

will lock and the DOOR LOCK indicator light will illuminate.

- To avoid water spillage, do not open the detergent drawer during a running programme.

- The remaining duration of the programme may vary. Factors such as imbalance in the

wash load or foam formation may aect the programme duration.

8. Change the conguration of a running programme, if necessary

- You can change the settings while a programme is running. The changes shall be

implemented as long as the respective programme phase has not been completed yet.

- To change the conguration of a running programme:

- Press the START/PAUSE icon to pause the running programme.

- Change your settings.

/ 468

Bekijk gratis de handleiding van Cecotec Bolero DressCode 8900 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.