Cecotec Bolero DressCode 8800 Inverter A Handleiding (348 Pagina's)

Handleiding

/ 348

Je bekijkt pagina 100 van 348

BOLERO DRESSCODE 8800 INVERTER A / INVERTER STEEL A / INVERTER ICE BLUE A

100

ENGLISH

- The use of hose extensions is not recommended; if absolutely necessary, the extension

should have the same diameter as the original hose and should not exceed 250 cm in length

(Fig. 12).

- If drain hose is too long, do not force it into washing machine as it will cause abnormal

noises.

- After installation, wait a few hours before operating the appliance to allow it to acclimatise

to the ambient conditions in the room.

- Only connect the device when the installation has been completed.

4. OPERATION

Note

Before washing the clothes for the rst time, the product shall be operated in one round of the

whole procedures without the clothes inside.

Control panel

A: Wash cycle knob

- Used to programme the desired wash cycle.

- OFF position : turn the wash cycle knob, when the indicator light below the symbol

is on, the machine will stop running and turn o. If the machine is switched o during a wash

cycle, the wash cycle will be cancelled.

B: TEMP (Temperature)

Press the button to change the water temperature of the selected cycle, the temperature value

will appear on the display.

C: SPEED

Press the button to change the spin speed of the selected cycle, the speed value will appear

on the display.

CHILD LOCK FUNCTION

When a wash cycle is running, if you want to activate the child lock, press, and hold the SPEED

button for about 3 seconds.

Sound cancellation (buzzer)

- Press and hold the SPEED button and the ONE SMART button at the same time for at

least 3 seconds.

- You can cancel the sound during a wash cycle.

- Perform the same operation to restore the sound.

/ 348

Bekijk gratis de handleiding van Cecotec Bolero DressCode 8800 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.