Cecotec Bolero DressCode 8610 Inverter A handleiding

Wasmachine

Cecotec

492 pagina's

PDF beschikbaar

Handleiding

/ 492

Je bekijkt pagina 126 van 492

BOLERO DRESSCODE 7610 / 8610 / 9610 / 10610 INVERTER A

126

ENGLISH

Down jacket

Cycle for washing down jackets (weighing no more than 2.0 kg), cushions or garments padded

with goose down. We recommend that the jacket is placed in the drum with the edges folded

inwards (Fig. 15) and that no more than 3/4 of the total drum volume is used. For best results,

we recommend using a liquid detergent.

Steam function

Press the “STEAM” button to add a steam wash process after the last water drain stage of the

selected (or ongoing) wash cycle and before the last spin. In the steam washing process, the

machine generates a large amount of high temperature steam which penetrates deep into the

fabrics, improving their softness and elasticity and, at the same time, eliminating unpleasant

odours and refreshing the laundry. After the steam washing process, the machine enters the

nal stage of rinsing and spinning.

Wool

- Cycle designed for woollen garments.

- Before washing, conrm that the garment is labelled “machine washable.”

- After completing the procedure, take out the laundry quickly, shape it and dry it to avoid

deformation caused by being placed in the drum for a long time.

- To avoid damage to the laundry, the water temperature should not exceed 40 °C.

- For best results and to reduce damage to the laundry, use a special detergent for wool and

do not exceed 1.0 kg of laundry.

IMPORTANT: after use, conrm that the garments have not been damaged or shrunk.

Delay End

- After selecting the wash programme, press the Delay End button repeatedly to set the

programme end time, which is incremented in one-hour intervals, up to a maximum of 24

hours. After selecting the desired wash programme, but before pressing the START/PAUSE

button, press the Delay End button until the desired time is displayed, e.g. 8h, with the

Delay End indicator light on.

NOTE: the cycle time is included in the set deferred end time.

- Example of a cycle time of 1 hour and 30 minutes and a delayed end time of 8 hours.

- 8 h is shown on the display and a countdown (approx. 6 hours and 30 minutes) until the

wash cycle starts, then the cycle duration 1: 30 is shown and starts. The total time is

approximately 8 hours.

- The way to cancel the deferred termination function is as follows:

- Turn the wash cycle knob to reset the wash cycle. The Delay End indicator light will go out

and the display will stop showing the delay completion time.

/ 492

Bekijk gratis de handleiding van Cecotec Bolero DressCode 8610 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.