Cecotec Bolero DressCode 8500 Inverter A handleiding

Wasmachine

Cecotec

128 pagina's

PDF beschikbaar

Handleiding

BOLERO DRESSCODE 8500 INVERTER A / BOLERO DRESSCODE 8500 INVERTER STEEL A

7978

ENGLISH ENGLISH

3. Ret the detergent drawer and the siphon.

- It’s possible for some detergent to get into the drum when removing the detergent drawer.

This is normal.

- To avoid spillage, make sure that no water, detergent, or softener is left in the detergent

drawer before removing it.

Defrosting

Do not expose the washing machine to temperatures below 0°C, as this may aect its operation

and the lifespan of its parts. Should you notice frozen parts, follow the below procedure:

1. Turn o the washing machine and unplug the power cord.

2. Pour hot water over the tap to loosen the water inlet hose.

3. Disconnect the water inlet hose and immerse it in hot water.

4. Pour hot water into the drum and leave it for about 10 minutes.

5. Reconnect the water inlet hose to the tap.

Please note

1. When resuming use of the washing machine, make sure that the ambient temperature is

above 0°C.

2. If the washing machine is located in a room where it can easily freeze, thoroughly drain the

remaining water inside the drain hose and water inlet hose.

3. Refer to a technician if the washing machine freezes. If the washing machine still does

not work after the above procedure, please contact the ocial Cecotec Technical Support

Service.

6. TROUBLESHOOTING

PROBLEMS POSSIBLE SOLUTIONS

There’s water in the drum

before rst use.

This is normal. It’s the result of factory water tests.

The washing machine does

not turn on.

Check that the plug is properly connected to the socket.

Check if the tap is open.

Check if the Power button was pressed.

Check if the Start/Pause button was pressed.

Check if the Delay Start function is enabled.

The washing machine leaks. Check and tighten the water inlet hose.

Clean the drain hose and contact the ocial Cecotec

Technical Support Service.

Strange noise and strong

vibrations.

Check whether the transport bolts have been removed.

Check if the levelling feet are properly adjusted. Check

if the washing machine is installed on a level and solid

surface.

Check for metal items inside.

Washing results are not

satisfactory.

Select a suitable washing programme.

Add the appropriate amount of detergent according to the

instructions on the detergent package.

The buttons do not work. Check whether the "Child Lock" function is enabled.

The actual running time

of the programmes does

not correspond to the time

indicated on the display.

Check if the laundry in the drum is evenly spread out.

Check if the water ows in and out properly.

The washing machine lls up

during draining.

Check if the height of the drain hose is less than 65 cm.

Check if the drain hose is submerged.

7. ERROR CODES

CODE PROBLEM POSSIBLE SOLUTIONS

E1 The washing

machine takes a

long time to ll up.

Check if the water inlet tap is open.

Check that the water pressure is not too low.

Check that the water inlet hose is not dirty or blocked.

E2 The washing

machine takes a

long time to drain

the water.

Check that the drain pump is not blocked.

E3 The door is not

closed properly.

Check that there are no items such as clothes or dirt

between the door and the seal.

E4 The water

overows.

Check that the water outlet hose is not dirty or blocked.

E5 Electric motor

failure.

Contact the Technical Support Service of Cecotec.

Bekijk gratis de handleiding van Cecotec Bolero DressCode 8500 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.