Cecotec Bolero DressCode 7610 Inverter A Handleiding (492 Pagina's)

Handleiding

/ 492

Je bekijkt pagina 131 van 492

BOLERO DRESSCODE 7610 / 8610 / 9610 / 10610 INVERTER A

131

ENGLISH

8. Change the conguration of a running programme, if necessary

- You can change the settings while a programme is running. The changes shall be

implemented as long as the respective programme phase has not been completed yet.

- To change the conguration of a running programme:

- Press the “START/PAUSE” button to pause the running programme.

- Change your settings.

- Press the START/PAUSE” button again to continue the programme.

- If you have changed the programme, do not add detergent for the new programme.

- To prevent a running program from being accidentally changed (e.g. by children), use the

Child Lock function.

Pausing a running programme and opening the door

- Press the START/PAUSE button to pause the running programme.

- If the water level and/or temperature in the drum is/are not high, the “DOOR LOCK”

indicator light will go out. You can open the door, for example, to add more laundry or

to remove laundry that was loaded by mistake. Press the START/PAUSE button again to

continue the programme.

1. Cancellation of a running programme (if necessary)

- Turn the wash cycle knob to turn o the machine while the light under the “ ” symbol is on.

- If the water level and/or temperature is low enough, the door will unlock and can be

opened.

- The door will remain locked if there is a higher water level in the drum. To unlock the door,

rst turn the wash cycle knob to select the SPIN programme, then turn o the SPIN option

by pressing the SPEED button to set the spin speed to “-” (should be displayed on the digital

display).

- Press the START/PAUSE button to run the SPIN programme. Water will drain from the

drum during the wash cycle. The door unlocks at the end of the programme.

2. Switching o the device after the end of a washing programme

- At the end of the cycle, the message “END” is shown on the digital display.

- The door can only be opened when the DOOR LOCK indicator light goes out.

- Check that the DOOR LOCK indicator light is o, then open the door and remove the laundry.

- Turn the wash cycle knob to switch o the machine to the OFF position.

- Leave the door ajar to allow the inside of the drum to dry out and prevent odours and

mould growth.

/ 492

Bekijk gratis de handleiding van Cecotec Bolero DressCode 7610 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.