Cecotec Bolero DressCode 7500 Inverter A handleiding

Wasmachine

Cecotec

115 pagina's

PDF beschikbaar

Handleiding

BOLERO DRESSCODE 7500 INVERTER ABOLERO DRESSCODE 7500 INVERTER A

7170

ENGLISH ENGLISH

SteamMax

- This function activates along with the Intensive, Bed Linen, and AllergyCare washing

programmes (the SteamMax. icon lights up).

- The function performs extra steam-sterilisation cleaning together with the selected

washing programme.

- This function cannot be disabled.

Child Lock

- To prevent accidents, the Child Lock locks all buttons except the Power button.

- To enable or disable Child Lock, press and hold the temperature and speed buttons for 3

seconds.

- When the Child Lock is enabled, the Child Lock icon lights up.

Mute

- You can enable or disable the sound of the selection knob and all buttons.

- To enable or disable the sound, press and hold the Speed and Delay Start buttons

simultaneously for 3 seconds.

- When the sound is disabled, the Mute icon lights up.

Door Lock

- When washing starts, the door is locked, and the Door Lock icon lights up for safety

reasons.

- At the end of a washing programme and after a few seconds, the door unlocks for you to

remove the laundry.

Extra Load

- Hold down the Start/Pause button for 3 seconds. Once the door is unlocked, you can add

more laundry in the washing machine.

- For safety reasons, the Extra Load function cannot be used if there is excess water in the

drum or if water temperature is high.

Other functions

Emergency door unlocking

- If you want to remove the laundry in case of long-term power failure, make sure that the

water level in the drum is below the door bottom level, the temperature is below 40°C (or

low enough to exclude the risk of burns), and the drum does not rotate. Then, disconnect

the drain hose and reconnect it. Wait until there’s no more water in the drum.

- Once the water has completely drained out of the washing machine, open the drain-outlet

cover at the front bottom-right corner, pull the rod slightly downwards, and, as soon as

you hear a slight sound, open the door and take out the laundry.

Control panel

Selection

knob

Turn the knob to select a washing programme.

Display

The display shows the current programme information and estimated time

remaining, or an information code when a fault occurs.

Temperature

Press this button to change the washing-programme water temperature. The

available temperature range varies from programme to programme.

The selected temperature will be shown on the display.

Speed

Press this button to change the spin speed of the programme. The available

spin-speed options depend on the programme.

The selected spin speed will be shown on the display.

Delay Start

Press this button repeatedly to cycle through the available options (from 3 to

24 hours in one hour increments).

Start/Pause

Press this button to start or stop the washing process:

Press the button once to start the washing programme.

To stop the programme, press the button again.

To resume the programme, press the button again.

Power

Press this button to switch the washing machine on or o.

If you switch on the machine and do not press any button within 10 minutes,

the machine will switch o automatically.

Delay Start

You can set the washing machine to automatically end washing at a specic time by choosing

a delay between 3 and 24 hours (in 1 hour increments).

1. Choose the desired programme and change the cycle settings if necessary.

2. Press the Delay Start button repeatedly until the desired end time is set.

3. Press the Start/Pause button.

4. To disable the Delay Start feature, restart the washing machine by pressing the Power

button.

Example:

Current time: 2:00 p.m.

Desired starting time: 5:00 p.m.

1. Select the washing programme.

2. Select the “Delay Start” function and set 3 hours by pressing the Delay Start button.

3. Press the Start/Pause button.

The washing machine will start operating at 5:00 p.m.

Bekijk gratis de handleiding van Cecotec Bolero DressCode 7500 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.