Cecotec Bolero DressCode 7000 D Handleiding (236 Pagina's)

Handleiding

/ 236

Je bekijkt pagina 11 van 236

11

BOLERO DRESSCODE 7000 D - 7000 STEEL D

- Do not remove the lter from the drain pump while there is

water left in the machine. Hot water spillage may occur.

- Before carrying out any maintenance in the device, unplug

the appliance from the mains.

- As a safety measure, we advise you to unplug the appliance

and cut the water supply after every use. Maximum water-

inlet pressure: 1 MPa. Minimum water-inlet pressure: 0.05

MPa.

- Use the new hoses supplied with the equipment.

- Never unplug the appliance with wet hands.

- Unplug the power cord before cleaning or repairing the

product.

- For safety reasons, the appliance must be properly earthed.

- Water channelling and electrical devices must be connected

by a qualied technician in accordance with the local and

national safety regulations specied by the manufacturer.

- The glass door may reach high temperatures during

operation. Keep children and pets away from the glass door.

- Do not use the device in rooms where water, moisture,

explosives, or caustic gases are present.

- If the room where the washing machine is located has

any type of device that generates fumes from the burning

of fuels, make sure that there is proper ventilation, as the

accumulation of these fumes may cause a re hazard.

- Do not wash items that have been soiled with substances

such as cooking oil, acetone, alcohol, petrol, kerosene, spot

removers, turpentine, waxes, and wax removers.

- Items such as foam rubber, shower caps, waterproof textiles,

rubber backed articles, and clothes, or pillows tted with

foam rubber pads should not be washed in the machine.

- Fabric softeners or similar products should be used as

specied by manufacturer.

/ 236

Bekijk gratis de handleiding van Cecotec Bolero DressCode 7000 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.