Cecotec Bolero DressCode 10980 Direct Drive handleiding

235 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 61 van 235
BOLERO DRESSCODE 10980 DIRECT DRIVE STEEL A/ BOLERO DRESSCODE 10980 DIRECT DRIVE BLUE A
BOLERO DRESSCODE 12980 DIRECT DRIVE STEEL A / BOLERO DRESSCODE 12980 DIRECT DRIVE BLUE A
BOLERO DRESSCODE 10980 DIRECT DRIVE STEEL A/ BOLERO DRESSCODE 10980 DIRECT DRIVE BLUE A
BOLERO DRESSCODE 12980 DIRECT DRIVE STEEL A / BOLERO DRESSCODE 12980 DIRECT DRIVE BLUE A
121120
ENGLISH ENGLISH
Delay End function
This function allows you to select the end time of the programme. The selection range is
between 3 to 24 hours. Once the Delayed End function has been activated, the corresponding
indicator light will ash on the display.
Note: the time of the Delay End function is the time of the end of the programme, not the start
time.
Programme change when a programme is already running
Programme change is allowed during operation. To do this, press the Start/Pause icon and
then select the desired programme.
5. CLEANING AND MAINTENANCE
Note: the washing machine must be serviced after prolonged use. Following these instructions
will extend the life of your appliance. Unplug the washer from the power outlet before servicing
to avoid hazards. Before cleaning the drawer, make sure that there are no detergent or fabric
softener residues. After each use, leave the door of the washing machine ajar for a certain
period of time to prevent condensation, mould and odours, and then close the door to avoid
any possible incidents.
Drum Clean
The drum may become dirty after using the machine for a period of time. Use the Drum Clean
programme to clean it.
Note: you can use a specic detergent for drum cleaning.
Cleaning of door gaskets and body
After each wash, remove dirt and debris with a soft cloth. Make sure that there are no foreign
objects in the door gasket.
Cleaning the detergent drawer
To prevent the formation of mould in the detergent drawer, clean it regularly. Remove the
detergent drawer and put it back in place after cleaning. You can use warm water and a soft
brush to remove any solid detergent or fabric softener residue.
Cleaning the water inlet valve
1. Remove the water supply hose from the back of the washing machine and remove the lter
screen from the water inlet valve with pliers (be careful not to damage the valve).
2. Clean the lter screen with a soft brush and then put it back in place.
3. Finally, reconnect the hose.
4. Make sure that there are no water leaks.
Cleaning of the drain pump lter (recommended once a month)
In case of a power failure while the washing machine is running, the draining process must be
carried out manually. To do this, open the drain pump cover. There are two ways of doing this.
Note: If the water temperature of the washing machine is high, wait until it decreases.
Method 1: press the top of the drain pump cover by hand to lift it up (Fig. 12).
Method 2: insert a suitable tool into the hole at the top of the cover. Then, press it down and
open it by pulling it outwards (Fig.13).
- Remove the plug from the emergency drain hose to empty the waste water from the drum.
Replace it when there is no water left. Use a suitable container so that the water does not
fall on the oor. Water may be at a very high temperature RISK OF BURNS.
- Turn the lter cover counterclockwise to remove the lter.
- Rinse the lter with water.
- Re-insert the lter in line with the drain pump and turn it clockwise to secure it. Finally,
put the cover on.
Emergency door opening
In an emergency, pull the ring on the door to open it (located next to the drain pump lter).
After that, put it back into place (Fig. 14).
Fig. 14 key:
1. Emergency door pull ring
2. Emergency drain hose
3. Drain pump lter
Note: do not pull the emergency ring during the normal washing process. Before opening the
door, pull out the emergency drain hose and remove the plug until the water drains out of the
machine. The water may be very hot; be careful.

Bekijk gratis de handleiding van Cecotec Bolero DressCode 10980 Direct Drive, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCecotec
ModelBolero DressCode 10980 Direct Drive
CategorieWasmachine
TaalNederlands
Grootte25855 MB