Cecotec Bolero DressCode 10980 Direct Drive handleiding

Wasmachine

Cecotec

235 pagina's

PDF beschikbaar

Handleiding

/ 235

Je bekijkt pagina 59 van 235

BOLERO DRESSCODE 10980 DIRECT DRIVE STEEL A/ BOLERO DRESSCODE 10980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 12980 DIRECT DRIVE STEEL A / BOLERO DRESSCODE 12980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 10980 DIRECT DRIVE STEEL A/ BOLERO DRESSCODE 10980 DIRECT DRIVE BLUE A

BOLERO DRESSCODE 12980 DIRECT DRIVE STEEL A / BOLERO DRESSCODE 12980 DIRECT DRIVE BLUE A

117116

ENGLISH ENGLISH

Rinse + Spin 10

- - -

Spin 10

- - -

Drum Clean /

- - -

L: liquid detergent (if you use liquid detergent, it is not recommended to enable the Delay End

function).

P: powder detergent.

O: optional.

-: no detergent or fabric softener.

Use recommendations:

Use powder detergent from 20 °C to 90 °C.

Use wool detergent from 20 °C to 40 °C.

NOTE: maximum loads are approximate and recommended values to achieve the best results.

Display and knob (Fig. 10)

- The display shows the remaining programme time, the time of the Delay end function and

the error codes in case of malfunctions.

- It is also used to display the water temperature, number of rinses and spin speed.

- Fig. 10 key:

1.- Door lock indicator light

2.- Steam indicator light (Steam Max - Steam)

3.- Favourites indicator light (favourite programme)

4.- Delay indicator light (Delay End)

5.- Pre-Wash indicator light

6.- Delay End function icon

7.- Pre-Wash function icon

8.- UV function icon (Ultraviolet light)

9.- Steam function icon (Steam Max - Steam)

10.- Temp function icon

11.- Rinse function icon

12.- Speed function icon (Spin speed)

13.- Favourites function icon

14.- Power icon

15.- Start/Pause icon

- Turn the knob to choose the desired washing programme (you can also press on the icon of

the corresponding programme to select it). The indicator light of the selected programme

will light up and ash.

- To the right and left of the knob are the icons for the special functions.

- Once you have selected a washing programme, press the icon of the function you want

to display or change (e.g. water temperature, spin speed, etc.). If you press the same icon

again before 2 seconds have elapsed, you can change the corresponding parameter.

NOTE: depending on the selected washing programme, you can select and/or modify the

dierent functions. Certain functions are not compatible with some washing programmes.

NOTE: the icons on both sides of the knob will be on when the machine is in standby mode and

o when the machine is in operation.

Special functions:

Delay (Delay End function)

After selecting a washing programme, set the time of the Delay End function. This value will be

shown on the display. When the washing programme starts, the countdown starts.

Pre-Wash

If the laundry is too dirty, you can choose this programme before washing to make washing

easier.

UV (Ultraviolet light function)

By pressing this icon, the UV light inside the drum will be activated when the programme starts

and during draining, disinfecting the drum, ensuring thorough cleaning and improving visibility

during use.

Steam (Steam Max - Steam functions)

After selecting a washing programme, press this icon to activate the Steam function. This

function improves washing performance and reduces soiling of the laundry.

Temp

When a washing programme is selected, the display shows the water temperature.

Rinse

After selecting a washing programme, press this icon to adjust the number of rinses.

Speed

Press this icon (when the machine is paused or when the programme is running), the spin

speed will be displayed.

/ 235

Bekijk gratis de handleiding van Cecotec Bolero DressCode 10980 Direct Drive, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.