Cecotec Bolero DressCode 10900 Inverter A Handleiding (400 Pagina's)

Handleiding

/ 400

Je bekijkt pagina 118 van 400

BOLERO DRESSCODE 10900 INVERTER FULLCOLOR A

BOLERO DRESSCODE 10900 INVERTER FULLCOLOR STEEL A

BOLERO DRESSCODE 10900 INVERTER FULLCOLOR ICE BLUE A

118

ENGLISH

2. Close the door

Make sure that there are no dirty clothes between the door glass and the rubber seal.

Close the door, make sure you hear the “click” as it closes.

3. Open the tap

Make sure that the appliance is connected to the water mains. Open the tap.

4. Set the desired programme

Press the power icon for a few seconds to switch on the appliance and then select the

desired programme (its indicator light will light up). The duration of the washing cycle

is shown on the display. The machine automatically displays the default temperature

and possible spin speed settings for the selected programme. Adjust the temperature

and/or spin speed settings, if necessary, with the corresponding icons.

- Change the temperature, if necessary

Press the TEMP (Temperature) icon to progressively decrease the temperature setting

until cold wash is reached (“--” will be displayed on the digital display). Pressing the

icon again sets the highest possible setting.

- Change the spin speed, if necessary

Press the SPEED icon to progressively decrease the spin speed until the spin cycle is

switched o (“--” will be shown on the digital display). Pressing the icon again sets the

highest possible setting.

- Select options, if necessary

Press the icons to select the desired option; the indicator light of the corresponding

option will turn on.

Press the icon(s) again to cancel the option, the indicator light of the corresponding

option will go out.

- If the selected option is incompatible with the congured programme, the

incompatibility will be signalled by a beep of the buzzer and the indicator light of the

corresponding option will ash.

- If the selected option is incompatible with a previously congured option, only the

most recent selection shall remain active.

5. Add detergent

- Remove the detergent dispenser and add detergent and fabric softener (if applicable)

into the corresponding compartments as described in gure 17.

- Compartment 1: detergent powder

- Compartment 2: liquid detergent (must not exceed the level marked MAX).

- Compartment 3: additives such as softener (must not exceed the level marked MAX).

- Observe the dosage recommendations of the detergent/softener manufacturer.

/ 400

Bekijk gratis de handleiding van Cecotec Bolero DressCode 10900 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.