Cecotec Bolero DressCode 10900 Inverter A handleiding

Wasmachine

Cecotec

400 pagina's

PDF beschikbaar

Handleiding

/ 400

Je bekijkt pagina 116 van 400

BOLERO DRESSCODE 10900 INVERTER FULLCOLOR A

BOLERO DRESSCODE 10900 INVERTER FULLCOLOR STEEL A

BOLERO DRESSCODE 10900 INVERTER FULLCOLOR ICE BLUE A

116

ENGLISH

3. After setting the child lock function, its indicator light will light up, the door cannot

be opened and the control panel is locked, the icons remain inactive. The appliance

can only be switched o by pressing the power icon. If the machine is switched o,

the child lock function will be cancelled.

4. If you switch o the appliance and switch it on again, the machine runs the selected

programme directly before switching it o.

Setting the time of a programme

- Press the + or – icons to adjust the time. The time setting value of a programme will be

shown on the digital display and the appliance will operate according to that time.

- The Drum Clean Plus and ECO 40-60 programmes do not allow time adjustment.

Adding laundry during a washing cycle

When the programme is running, press and hold the START/PAUSE icon to pause the

appliance. If the DOOR LOCK indicator light switches o, the door can be opened, you can

add or remove laundry. Once the operation is complete, close the door, and press and hold the

START/PAUSE icon again; the machine continues to run from the point where it was interrupted.

NOTE:

If the water level or water temperature in the drum is too high, the door lock indicator light

comes on, the door cannot be opened, and laundry cannot be added or removed during the

programme run (for safety reasons).

Control panel illumination

- The control panel shall remain illuminated during the whole process of setting

programmes or functions.

- If a programme is cancelled, the lighting can be activated by opening the door of the

washing machine.

- When a washing cycle is in operation, the illumination will be activated automatically

when there is a change of status.

- Pressing any icon on the control panel (except the power icon) will also activate the

lighting.

Load Balancing System

The washing machine has an automatic eccentric load detection system. In the spinning

process, if the laundry is unevenly distributed, the appliance will level and adjust the laundry

until it is evenly distributed before spinning. If the laundry cannot be evenly distributed within

the specied time, the appliance will not rotate to avoid excessive vibrations. At this point, you

should check whether the laundry is knotted or tangled and select the SPIN programme after

rearranging the laundry. When you wash less laundry, such as a pair of trousers, a jumper, a

bath towel, etc., the machine may not complete the spinning process due to balance protection.

/ 400

Bekijk gratis de handleiding van Cecotec Bolero DressCode 10900 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.