Handleiding
Je bekijkt pagina 31 van 61

COOLMARKET TF 90 WHITE
6160
ENGLISH ENGLISH
Low cooling
eciency
The food introduced is hot or there is
too much food.
You open the door too often.
The door gasket has objects that do
not allow to close it completely.
The freezer receives direct sunlight
or is close to a heat source.
The freezer is not well ventilated.
The selected temperature is too high.
Introduce food in the freezer when it
is at room temperature.
Check and close the door.
Remove the freezer from the heat
source.
Keep the recommended distances in
the installation section so the freezer
is well ventilated.
Adjust a suitable temperature.
Undesired
odours in the
freezer.
There is spoiled food inside.
The freezer is dirty.
You introduced food with strong
smells.
Dispose of spoiled food.
Clean the freezer.
Pack food, especially if it has a strong
smell.
Please note
If none of these situations match your problem, do not attempt to disassemble or repair the
freezer yourself. Repairs carried out by unqualied persons may result in injury or serious
malfunctions. Please contact the place where you bought the appliance or the Cecotec
Technical Support Service. The repair must be carried out by an authorised technician and you
must use only original spare parts.
8. TECHNICAL SPECIFICATIONS
You can access the product database where the information for this model is stored by
scanning the QR code on the energy label.
Product Bolero CoolMarket TF 90 white
Reference 02396
QR code
Voltage 220-240 V
Rated frequency 50 Hz
Please note
If the power cord and/or plug are damaged or dusty, electric shock and re may occur. If there
is any malfunction, disconnect the cord and contact the Technical Support Service of Cecotec.
7. TROUBLESHOOTING
For the following minor malfunctions, please try to solve the problem yourself before
contacting Cecotec Technical Support Service.
Fault Possible causes Possible solutions
The interior
temperature is
too cold
The set temperature may be too low. Increase the temperature. We
recommend position 2 for normal
use.
The interior
temperature is
too hot
The set temperature may be too
high.
Decrease the temperature. We
recommend position 2 for normal
use.
The compressor may not be running. Select the coldest setting, i.e.
position 4, and wait a few minutes. If
you do not hear a buzzing sound, the
compressor is not running.
Contact the ocial Technical Support
Service of Cecotec.
The freezer
does not work.
The freezer is not connected to the
mains.
The circuit breakers or fuses are
damaged.
There is no power or the fuse trips.
Connect the freezer to a power
supply.
Open the door and check the light
is on.
Abnormal noise
The freezer is not stable.
The freezer is in contact with the
wall.
Adjust the legs.
Separate the freezer from the wall.
The following noises are normal:
Gurgling, hissing.
These noises are caused by the circulation of coolant in the cooling system. It
has become more pronounced since the introduction of CFC-free gases. This
is not a malfunction and will not aect the performance of your freezer.
Buzzing, purring or pulsing sounds
This is the operation of the compressor motor as it pumps refrigerant around
the system.
Bekijk gratis de handleiding van Cecotec Bolero CoolMarket TF 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | Bolero CoolMarket TF 90 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 5522 MB |







