Cecotec Bolero CoolMarket Chest 400 handleiding

Vriezer

Cecotec

95 pagina's

PDF beschikbaar

Handleiding

Bolero CoolMarket Chest 142 Black /White E

Bolero CoolMarket Chest 199 Black/White E

Bolero CoolMarket Chest 254/299/400/500 White E

Bolero CoolMarket Chest 142 Black /White E

Bolero CoolMarket Chest 199 Black/White E

Bolero CoolMarket Chest 254/299/400/500 White E

6564

ESPAÑOL

2. BEFORE USE

- This appliance is packaged in a way as to protect it during transport. Take the appliance

out of its box and remove all packaging materials. You can keep the original box and other

packaging elements in a safe place. This will help you prevent damage to the appliance

when transporting it in the future. In case the original packaging is disposed of, make sure

all packaging materials are recycled accordingly.

- Make sure all parts and components are included and in good conditions. If there is any

piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service

immediately.

Levelling

- Make sure you level your refrigerator with the front levelling feet. If it is not levelled, the

refrigerator performance will be aected, or it can even cause a malfunction.

- After installing the refrigerator, wait 4 hours before using it to allow the refrigerant to

stabilise.

3. INSTALLATION

Place of installation

Ventilation condition

The location you choose for the installation of the refrigerator must be properly ventilated and

away from heat sources. Do not place the refrigerator near heat sources, like a cooker or pot,

and avoid direct sunlight to ensure the cooling eect and save on energy consumption. Do not

place the refrigerator in a damp place to avoid rust or loss of power. The result of dividing the

total space of the room in which the refrigerator is installed by the amount of refrigerant load

in the refrigerator must not be less than 8 g/m³.

Note: the amount of refrigerant used by the refrigerator is specied on the rating plate.

Heat dissipation space

During operation, the refrigerator releases heat into the environment. Therefore, you should

leave at least 30 mm of free space at the top, more than 100 mm on both sides, and more than

50 mm at the rear of the refrigerator. Fig. 2

Width (mm) Depth (mm) Height (mm) A (mm) B (mm) C(°) E (mm) F (mm)

595 635 1855 966 1202 130 50 100

Note: gure 2 only illustrates the space required for the product.

10. GARANTÍA Y SAT

Cecotec responderá ante el usuario o consumidor nal por las faltas de conformidad que

existan en el momento de la entrega del producto en los términos, condiciones y plazos

establecidos por la normativa aplicable.

Se recomienda que las reparaciones sean realizadas por personal cualicado.

Si detecta una incidencia con el producto o tiene alguna consulta, póngase en contacto con el

Servicio de Asistencia Técnica ocial de Cecotec a través del número de teléfono +34 96 321

07 28.

11. COPYRIGHT

Los derechos de propiedad intelectual sobre los textos de este manual pertenecen a CECOTEC

INNOVACIONES, S.L. Quedan reservados todos los derechos. El contenido de esta publicación no

podrá, ni en parte ni en su totalidad, reproducirse, almacenarse en un sistema de recuperación,

transmitirse o distribuirse por ningún medio (electrónico, mecánico, fotocopia, grabación o

similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.

INDEX

1. PARTS AND COMPONENTS

Fig. 1

1. Refrigerator compartment shelves

2. Crisper box cover

3. Crisper box/Humidity box

4. Freezer-compartment drawers

5. Adjustable feet

6. Door shelves

7. Water tank

Note:

The graphics in this manual are schematic representations and may not exactly match the

appliance.

Bekijk gratis de handleiding van Cecotec Bolero CoolMarket Chest 400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.