Cecotec Bolero Aguazero 6210 D Handleiding (398 Pagina's)

Handleiding

/ 398

Je bekijkt pagina 85 van 398

BOLERO AGUAZERO 6210 D

BOLERO AGUAZERO 6210 INOX D

BOLERO AGUAZERO 6210 DARK D

85

ENGLISH

WARNING:

Do not open the door during operation or immediately after the end of the washing programme,

as steam build-up may cause burns.

Tips:

- You can rst remove the tableware from the bottom basket and then from the upper basket.

Doing so will prevent water from dripping from the upper basket onto the tableware in the

bottom basket.

- To save energy and water, try to maximise the capacity of the baskets.

Before use

Soft water system

- This dishwasher is equipped with a soft water system (salt tank). Its mission is to soften,

to a certain extent, the hardness of the water used and thus optimise the dishwashing

result.

- If the water in your area does not need to be descaled (low hardness), the dishwasher can

be used without dishwasher salt, but it is necessary to set the hardness level to H0 so that

the corresponding indicator light is not lit all the time.

- To achieve an optimal washing eect, the dishwasher needs soft water, otherwise water

spots will remain on the tableware and inside the dishwasher. Hard water can also produce

limescale deposits in the dishwasher and cutlery.

- If the hardness of the tap water exceeds a certain level, it must be softened, i.e. decalcied,

by adding salt to the water softener system inside the dishwasher. The amount of salt

required is adjusted according to the hardness of the tap water.

ATTENTION:

- Only use salt special for dishwashers. Any other type of salt not specically designed for

dishwasher use, especially table salt, will damage the water softener. In case of damage

caused by the use of unsuitable salt, Cecotec does not give any guarantee and is not liable

for any damage caused.

- Only add salt just before starting one of the full washing programmes. This will prevent

salt grains or salt water, which may have spilled, from remaining in the bottom of the

machine for a certain period of time, which could cause corrosion.

Check water hardness

1. Check the water hardness in your area. You can contact your water supply company to get

this information.

2. Adjust the water softener according to the hardness level of the water supplied.

/ 398

Bekijk gratis de handleiding van Cecotec Bolero Aguazero 6210 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.