Cecotec Bolero Aguazero 6210 D Handleiding (398 Pagina's)

Handleiding

/ 398

Je bekijkt pagina 83 van 398

BOLERO AGUAZERO 6210 D

BOLERO AGUAZERO 6210 INOX D

BOLERO AGUAZERO 6210 DARK D

83

ENGLISH

- The supply voltage is within the values indicated on the rating plate.

- The socket is compatible with the plug of the appliance. If not, have the socket replaced by

an authorised technician. Do not use an extension lead or multiple sockets.

- Once the appliance has been installed, the power cable and the socket must be easily

accessible.

- The cable must not be bent or compressed.

- If the power cable is damaged, it must be replaced by the ocial Cecotec Technical Support

Service to avoid any potential risk.

- Cecotec will not be held responsible for any incidents that occur if these rules are not

followed.

For safety reasons, remove the fuse, switch o the circuit breaker or disconnect the dishwasher

before installation.

The plug must be inserted into a properly installed and earthed socket (in accordance with

local regulations and standards).

Connect the dishwasher to a protected and adequately rated power supply circuit to prevent

electrical overload.

Final checks

1. Connect the dishwasher to the electric circuit.

2. Open the water supply.

3. Make sure that the dishwasher door can be opened and closed smoothly.

- If necessary, re-level the dishwasher.

- If the door cannot close, check that the baskets are level (Fig.19).

- Make sure that you have removed all packaging material.

1. Switch on the dishwasher and run the Intensive 65 ºC programme to check that it is

working properly.

2. Check hoses for leaks.

3. Check that you have removed all packaging material and the stickers on the dishwasher.

/ 398

Bekijk gratis de handleiding van Cecotec Bolero Aguazero 6210 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.