Cecotec Bolero Aguazero 6210 D Handleiding (398 Pagina's)

Handleiding

/ 398

Je bekijkt pagina 82 van 398

BOLERO AGUAZERO 6210 D

BOLERO AGUAZERO 6210 INOX D

BOLERO AGUAZERO 6210 DARK D

82

ENGLISH

Tips:

1. The water supply pressure must be between 30 kPa and 1000 kPa.

2. Try not to damage the thread when connecting the water inlet hose to the inlet valve.

3. If the water supply pressure exceeds 1000 kPa, install a pressure reducing valve (not

included).

4. Open the tap and check for water leaks at the connector and/or hose.

5. Check the hose regularly and replace it if it is found to be deteriorated.

6. Make sure that the hoses are not damaged or criss-crossed.

To perform the connection, follow the steps below:

1. Check the rubber seal on both sides of the hose. Insert the rubber seal into the threaded

connection of the hose to prevent leakage (Fig. 15).

Fig. 15 key:

1. Rubber seal.

2. Hose.

2. Connect the hose to the tap by hand and then tighten it with pliers or a suitable tool (not

supplied). Tighten by about 2/3 of a turn (Fig. 16).

3. Then turn on the tap to remove any dirt that may have accumulated in the hose. Pour the

water into a container and check that the water is at room temperature (Fig. 17).

4. Connect the hose to the water supply valve at the rear of the dishwasher. You can connect

it by hand and then tighten it securely but carefully using pliers or a suitable tool (not

included). Fig. 19

5. Open the tap to check for water leaks. If you notice water dripping, repeat steps 1-4.

Connection of the power supply cable

- Connect the dishwasher to an earthed socket outlet in accordance with the current

electrical specications and regulations in your country and protect it with a circuit breaker

or fuse of at least 15 Ampere.

- The two-wire system with earthing should be adopted for wiring.

- Try not to place the power cable behind the dishwasher, as it could get trapped and

damaged. It is advisable to plug the appliance into a socket that is 1.2 metres from its side.

WARNING:

- Before plugging the appliance into the mains, make sure that:

- The plug is earthed and complies with current regulations.

- The plug can withstand the maximum load of the appliance, which is indicated on the

product rating plate.

/ 398

Bekijk gratis de handleiding van Cecotec Bolero Aguazero 6210 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.