Cecotec Bolero Aguazero 6210 D Handleiding (398 Pagina's)

Handleiding

/ 398

Je bekijkt pagina 101 van 398

BOLERO AGUAZERO 6210 D

BOLERO AGUAZERO 6210 INOX D

BOLERO AGUAZERO 6210 DARK D

101

ENGLISH

The

dishwasher

gives o an

unpleasant

smell

The previous programme has stopped before the end and the residual

water still remains in the dishwasher.

Empty the dishwasher and then switch it on. Cancel the previous

programme so that all residual water is drained, then put detergent in the

dispenser and run the Intensive+ programme.

There is food residue at the bottom of the dishwasher or in the lter.

Clean the lter and the inside of the dishwasher.

Dirty tableware has been in the dishwasher for a long time.

Fill a bowl (or cup) with white vinegar and place it in the top basket of the

dishwasher (vinegar is an acid that can damage electrical appliances if

used frequently.)

Water

remains in the

dishwasher

after the

washing

programme

Check if the drain hose is clogged or kinked.

Stretch the hose or clear the blockage.

Food remains

on the

tableware

You have selected the wrong programme.

Select the correct programme according to the level of soiling and type of

items to be cleaned.

You have not used detergent.

Use detergents suitable for your dishwasher.

Water supply pressure is low.

The water pressure must be between 0.03 and 1 MPa.

A hole of the spray arm is clogged.

Clean the spray arm holes.

You have loaded the dishwasher incorrectly.

Make sure that the tableware does not obstruct the movement of the

spray arms or interfere with the dispenser.

Filter blocked.

Clean the lter.

/ 398

Bekijk gratis de handleiding van Cecotec Bolero Aguazero 6210 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.