Cecotec Bolero Aguazero 2300 handleiding
Handleiding
Je bekijkt pagina 85 van 308
BOLERO AGUAZERO 2300/ INOX / DARK
85
ENGLISH
There are bubbles
inside the
dishwasher
You have used the wrong
powder detergent.
To avoid the formation
of bubbles, use a powder
detergent special for
dishwashers. If bubbles form,
run the washing programme as
many times as necessary until
they disappear.
Rinse aid has spilled. Immediately wipe up any spilled
rinse aid.
A yellowish lm has
formed on the inner
surface
These are stains of tea or coee
residues.
Clean the dishwasher with half
a cup of bleach and three cups
of warm water. Warning: After
running a washing programme,
wait for at least 20 minutes
until the heating element is cold
before cleaning the interior.
Otherwise, there is a risk of
burns.
Steam is formed This phenomenon is normal. There is a small amount of
steam released through the
door during the drying and
draining process.
Error codes
If there is a malfunction, the following error codes will appear on the display of the dishwasher
for identication purposes:
Codes Problem Possible causes
E01 Abnormal water
inlet
The tap is not open, the water pressure is too low, or the
water supply hose is clogged
E02 Open circuit /
thermistor short-
circuits
Device temperature detection failure.
E03 Overow There is too much water, or the machine is leaking.
Warning:
- If an overow occurs, turn o the main water supply before contacting the Technical
Service.
Bekijk gratis de handleiding van Cecotec Bolero Aguazero 2300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | Bolero Aguazero 2300 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 30378 MB |
