Cecotec Bolero Aguazero 1150 handleiding
Handleiding
Je bekijkt pagina 62 van 252
BOLERO AGUAZERO 1100
BOLERO AGUAZERO 1150 DARK
62
ENGLISH
- Place the dishwasher on a at and level surface.
3. INSTALLATION
3.1 Connecting the water supply hose
Fig. 2
1. Connect the water supply hose to the corresponding valve.
2. Connect the other end of the water supply hose to the valve.
Fig. 2 key:
A
Angle valve
B
Water supply hose
C
Drain hose
3.2 Connecting the drain hose
Fig. 3
1. Connect the drain hose to the corresponding connector.
2. Secure the hose with the hose clamp.
3. Place the other end of the drain hose into the sink.
3.3 Using the water tank
Fig. 4
- Before lling the water tank, make sure that there is nothing blocking the corresponding
opening.
- The capacity of the lling container is 2 litres. Pour 5 litres of water into the tank using the
container designed for this purpose. When the tank is full, the dishwasher will beep once.
Note:
- The dishwasher can be operated with water from the tank or from the water supply hose.
This second option is used by default.
- When the dishwasher is only supplied with water from the tank, it will not operate unless
the tank is full.
- If the dishwasher is using the water from the tank and you notice that there is a problem
with the water supply, check that the tank is not clogged and that there is enough water
in it.
- If the tank is used as the only water supply, cover the lling opening with the cap.
3.4 Connecting the dishwasher to the power supply
- Connect the appliance to a suitable socket.
- Do not use extension leads or adapters.
Bekijk gratis de handleiding van Cecotec Bolero Aguazero 1150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | Bolero Aguazero 1150 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 25047 MB |
