Cecotec BelleCouture OverLock Handleiding (208 Pagina's)

Handleiding

/ 208

Je bekijkt pagina 46 van 208

BELLECOUTURE OVERLOCK

46

ENGLISH

Place the thread from the back to the front on the right side of the looper. Carefully pull the thread to the left and slightly downwards until it

slides into the notch (B) of the looper (step 9).

Insert the thread from the front through the hole in the lower looper (step 10). The thread must pass through the groove in the looper.

Pass approx. 10 cm of thread through the looper and position it to the left underneath the presser foot.

Threading the right needle (green)

To thread the right needle (A), insert the thread by following steps 1-9 in the picture below.

/ 208

Bekijk gratis de handleiding van Cecotec BelleCouture OverLock, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.