Handleiding
Je bekijkt pagina 21 van 24
21
Mains connection
Prior to connection, it is recommended to set the temperature control
knob to an “OFF” or other position that disconnects the appliance
from the power supply (See page with the control description).
• This appliance should be connected to AC 220-240V 50Hz supply
socket. The socket must be fitted properly, and must be supplied
with an earthing conduit and a 10A fuse.
• It is a legal requirement that the appliance is properly earthed. The
manufacturer will not be held liable for any damage or injury which
may result from the failure to fulfil this requirement.
• Do not use adapters, multiple sockets and two-wire extension
leads. If it is necessary to use the extension lead, it must be
equipped with a protection ring and a single socket and must have
a VDE/GS safety certificate.
• If an extension lead is used (with a protection ring and safety
certificate), its socket must be located at a safe distance, away
from the sinks, and must not be in a place where it could be
flooded by water or waste water.
• See the type plate at the lower part of the internal wall of the
appliance for detailed specifications**.
Disconnecting the mains
Make sure the appliance can be easily
disconnected from the mains, either by
pulling the plug out of the mains socket,
or by switching the two-pole switch o.
Bekijk gratis de handleiding van CDA CRI521, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CDA |
| Model | CRI521 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1118 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Draaiknop |
| Kleur van het product | Wit |
| Ingebouwd display | Nee |
| Gewicht | 29500 g |
