Handleiding
Je bekijkt pagina 13 van 17
12
12.giF
Installation
Against the wall mounting method
When installing against the wall, measure the installation height of the whole machine, mark the
position of the holes with a marker pen, and drill three holes with a drill bit of 8mm in diameter,
the size of which is shown in Fig. 9.
After drilling the holes, put the three expansion tubes into the drilled holes, and then drive the
two screws for hanging the machine.
A 10mm dimension should be reserved between the screws for fixing and hanging the whole
machine on the wall, so as to facilitate the installation of the whole machine. After hanging the
whole machine, the third mounting screw will be driven into the expansion tube of the safety hole,
8
13.giF
10mm
When mounted against a
wall, the two sides can be
dangerous and need to be
guarded.
Safety holes
Bekijk gratis de handleiding van CDA CCV60MB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CDA |
| Model | CCV60MB |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 1332 MB |
