Catler SB 810 handleiding

Handleiding

12345678910111213141516171819202122232425/ 25

Afdrukken

Je bekijkt pagina 20 van 25

20

OPERATING YOUR SB 810 BLENDER

NOTE

We recommend setting the lowest

speed and gradually increasing it as

needed during processing. The values

in the table are only recommended

and may vary from case to case.

VACUUM ATTACHMENT

If you use ablender with avacuum

attachment, always make sure that the

protective rubber cap is inserted in the

vacuum attachment before using it. Never

use the vacuum attachment without

aprotective rubber cap.

The protective vacuum cap is two-sided.

Insert the cap into the vacuum attachment

depending on whether you are vacuuming

air from aspecial vacuum container or

aspecial vacuum bag.

If you are going to extract air from the

container, the wider end of the cap must face

outwards.

If you are going to extract air from the bag,

the narrower end of the cover must point

outwards.

Wider end of the cap suitable for extracting air

from the container

The narrower end of the cap is suitable for

extracting air from the bag

Set speed "1" and press hold down the

switch. You can use the vacuum attachment

for amaximum of 1 minute.

WARNING!

NEVER

USE ASPEED

HIGHER THAN "1".

OTHERWISE THERE IS

ARISK OF SERIOUS

DAMAGE TO THE

APPLIANCE.

12345678910111213141516171819202122232425/ 25

Bekijk gratis de handleiding van Catler SB 810, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Blender