Cata TDM 6003 handleiding

53 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 15 van 53
Using your Ceramic Hob (F1)
1. Double ring control
2. Regulator
3. ON/OFF
4. Zone selector
5. Stop&Go
6. Keylock
7. Time Regulating Key(Reduce)
8. Time Regulating Key(Increase)
To start cooking
1. Touch the ON/OFF " " for 2 seconds. After power on, the buzzer beeps once, all
displays show "0", indicating that the induction hob has entered the state of
standby mode.
2. Place a suitable cookware on the cooking zone that you wish to use. Make sure
the bottom of the cookware and the surface of the cooking zone are clean and
dry.
3. Set a power level between 0 and 9 by sliding along the "slider" " " key, or
just touch any point of the "slider" " ".
4. If you don’t choose a power setting within 30 seconds, the induction hob will
automatically switch off. You will need to start again at step 1.
· You can modify the power setting at any time during cooking.
When you have nished cooking
1. Touch the power level slider " " to decrease the power to "0" level.
2. Beware of hot surfaces.
After switching off the cooking zone, the corresponding power display will indicate
“H” until the temperature in the zone has dropped below the critical level. It will
disappear when the surface has cooled down to a safe temperature. It can also be
used as an energy saving function if you want to heat further cookware.
Using the Pause function – Stop&Go
The hob have a handy restart function to pause and restart
the cooking process if you're interrupted.
1. When the hob is on and working, press the pause key " " and hold for 3
seconds, all burner will stop working, and all LED indicator will show the symbol
丨丨”.
2. Touch the Pause key " " again for 3 seconds, the displays will blink with “丨丨",
then touch any key to recommence cooking and the displays will revert to their
previous settings
15
EN

Bekijk gratis de handleiding van Cata TDM 6003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCata
ModelTDM 6003
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5329 MB