Cartoni Lifto 25 handleiding
Handleiding
Je bekijkt pagina 22 van 28
22
6.4.3 d-tap cable for v-Mount batterIes
The LIFTO 25 can be operated using baeries as well. To this specic pur-
pose, a dedicated accessory has been conceived in order to use two 14V
baeries with the D-Tap cable for V-Mount baeries (APTZ0005).
! Never connect baeries and AC plug to the power sup-
ply unit at the same me.
Connect each baery to one D-Tap connector of the cable and then con-
nect the 2-pins Molex connector to one of the to DC ports (16) of the pow-
er supply unit (19). It is strictly forbidden to connect baeries and AC plug
to the power supply unit at the same me.
The power supply unit sports two DC ports and the hot swap between bat-
teries is possible in order to not interrupt the operaon. Nevertheless, con-
nect two D-Tap cables at the same me only for the me strictly necessary.
6.4.4 bluetooth reMote control
The operaon of the motorized elevaon unit (7) of the LIFTO 25 can be
controlled via an oponal Bluetooth remote control.
Insert the receiver in one of the two control device input ports “A1” or “A2”
(23 or 24, respecvely) of the power supply unit (19).
Press both transmier buons simultaneously to pair the transmier with
the receiver.
The Bluetooth remote control is now ready and you can move the LIFTO 25
using the two buons analogously to what you can do the the UP (26) and
DOWN (27) buon of the wired input device (22). No storable posions are
available in this case.
Bekijk gratis de handleiding van Cartoni Lifto 25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cartoni |
| Model | Lifto 25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4095 MB |
