Carson PA240 handleiding

Airco

Carson

23 pagina's

PDF beschikbaar

Handleiding

PA240 Portable Air Conditioner

E&OE © Carson 4

• Do not unplug by pulling on the power cord.

Handling and Operation

• D

o not operate with wet hands and prevent water from spilling onto the unit.

• Do not immerse or expose the unit to rain, moisture, or any other liquid.

• Do not leave the unit running unattended. Do not tilt or turn over the unit.

• Do not unplug the unit while it is operating.

• Do not use an extension cord or an adapter plug.

• Do not place objects on the unit.

• Do not climb or sit on the unit.

• Do not insert fingers or other objects into the air outlet.

• Do not touch the air inlet or the aluminium fins of the unit.

• Do not operate the unit if it is dropped, damaged, or showing signs of product malfunction.

• Do not clean the appliance with any chemicals.

• Ensure the unit is far away from fire, flammable, or explosive objects.

Installation and Storage

• T

he unit shall be installed in accordance with national wiring regulations.

• Do not use means to accelerate the defrosting process or to clean other than those recommended by the manufacturer.

• The appliance shall be stored in a room without continuously operating sources (e.g., open flames, an operating gas appliance, or an operating

electric heater).

• The appliance shall be stored to prevent mechanical damage from occurring.

• Do not pierce or burn the unit, even after use.

• Be aware that refrigerants may not contain an odour.

• Pipework shall be protected from physical damage and shall not be installed in an unventilated space if that space is smaller than 7m².

• Compliance with national gas regulations shall be observed.

• Keep any required ventilation openings clear of obstruction.

• The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area specified for operation.

• WARNING! PLEASE READ THIS MANUAL CAREFULLY AND FULLY UNDERSTAND IT BEFORE OPERATING YOUR APPLIANCE.

Additional Safety Instructions for Refrigerant Handling

• A

ny person involved in working on or breaking into a refrigerant circuit must hold a current valid certificate from an industry-accredited

assessment authority. This certificate authorises their competence to handle refrigerants safely in accordance with an industry-recognised

assessment specification.

Servicing and Maintenance

• S

ervicing shall only be performed as recommended by the equipment manufacturer.

• Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision of a person competent in

the use of flammable refrigerants.

Seeking Assistance

•

If you do not understand something or need help, please contact dealer services.

Safety Precautions on Servicing

• P

lease follow these warnings when servicing an appliance with R290.

• CHECKS TO THE AREA: Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to ensure that the

risk of ignition is minimized. For repairs to the refrigerating system, the following precautions shall be complied with before conducting work on

the system.

• WORK PROCEDURE: Work shall be undertaken under a controlled procedure to minimize the risk of a flammable gas or vapour being present

while the work is being performed.

• GENERAL WORK AREA: All maintenance staff and others working in the local area shall be instructed on the nature of the work being carried

out. Work in confined spaces shall be avoided. The area around the workspace shall be sectioned off. Ensure that the conditions within the area

have been made safe by controlling flammable materials.

• CHECKING FOR PRESENCE OF REFRIGERANT: The area shall be checked with an appropriate refrigerant detector prior to and during work

to ensure the technician is aware of potentially flammable atmospheres. Ensure that the leak detection equipment being used is suitable for use

with flammable refrigerants, i.e. non-sparking, adequately sealed, or intrinsically safe.

• PRESENCE OF FIRE EXTINGUISHER: If any hot work is to be conducted on the refrigeration equipment or any associated parts, appropriate

fire extinguishing equipment shall be available. Have a dry powder or CO2 fire extinguisher adjacent to the charging area.

• NO IGNITION SOURCES: No person carrying out work on a refrigeration system that involves exposing any pipework containing or that has

contained flammable refrigerant shall use any ignition sources that may lead to the risk of fire or explosion. All possible ignition sources, including

cigarette smoking, should be kept sufficiently far away from the site of installation, repair, removal, and disposal, during which flammable

refrigerant may be released into the surrounding space. Before work begins, the area around the equipment must be surveyed to ensure there

are no flammable hazards or ignition risks. “No Smoking” signs shall be displayed.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

Bekijk gratis de handleiding van Carson PA240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Merk	Carson
Model	PA240
Categorie	Airco
Taal	Nederlands
Grootte	7458 MB

Andere merken in Airco

Bekijk alle merken voor Airco