Carrier TB-TM handleiding
Handleiding
Je bekijkt pagina 16 van 116
Operating Instructions
ComfortVu™ Thermostat Standard TB/TM Series Carrier Proprietary and Confidential CARRIER CORPORATION ©2025
Installation and Operation Guide All rights reserved
12
In Two setpoints configuration:
1 Press the [+] or [-] buttons once - “ ” and the setpoint
temperature for cooling appears on display.
2 Use the [+] or [-] buttons to adjust the setpoint for cooling.
3 Press the [Mode] button or wait 3 seconds. “ ” and the
setpoint temperature for heating appears on display.
4 Use the [+] or [-] buttons to adjust the setpoint for heating.
TB | TB-24 | TM | TM 24 NOTE The setpoint for cooling must be
higher than the setpoint for heating.
TB-HM | TB-24-HM NOTES
• The setpoint for cooling must be higher than the setpoint for
heating.
• For humidity setpoint, see Technician Settings (page 80).
Selecting system mode
Press the [Mode] button to switch between system modes.
NOTES
• During demand for cooling or heating, the active mode flashes.
• In Auto mode, the active mode icon (Cool or Heat) flashes.
• Auto mode is not available in 2-Pipe system configuration.
Bekijk gratis de handleiding van Carrier TB-TM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carrier |
| Model | TB-TM |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 15804 MB |
