Carrier ComfortVu handleiding
Handleiding
Je bekijkt pagina 25 van 73
ComfortVu™ BACnet Thermostat Model Standard TB-HM (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2024
Installation and Operation Guide All rights reserved
21
Mount the BACnet Thermostat on an interior wall in the room to be controlled. Locate it where the occupant can easily read
the LCD display and use the controls. If the built-in temperature sensor is being used to measure room temperature, place
the thermostat where the temperature is representative of the general room conditions. Avoid cold or warm air drafts,
radiant heat, and direct sunlight.
WARNING
: Risk of electric shock and property damage. Disconnect power supply before making electrical
connections. The installation is to be performed by a qualified electrician.
WARNING
: The integrated circuits in the controller are sensitive to static currents. Take suitable
precautions.
General
Installation
1 Separate the front display from the back plastic cover by inserting a small flat screwdriver into each of the
three slots as shown in the picture and rotating it gently. Keep the front display in a safe place.
2 Connect the wires as shown in the enclosed wiring diagram. All terminals accept 1x0.5mm2/24 AWG.
If necessary, make changes to the DIP switches position as explained in this manual.
3 Place the thermostat in the electrical box and tighten up the 2 screws:
Europe - Gewiss Box - GW 24 203 or similar / US - Carlon – B114R or similar or similar
4 Adapt the front frame-panel into its place, by pushing it towards the wall.
Installation
Bekijk gratis de handleiding van Carrier ComfortVu, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carrier |
| Model | ComfortVu |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 9123 MB |
