Carlsbro CSD45M handleiding
Handleiding
Je bekijkt pagina 3 van 33
Drum kit assembly
1. Open the drum frame as illustrated.
*note: for left handed assembly, open the frame legs backwards, so the snare arm is to the right
hand side.
2. Once your frame is in position, slightly tighten the frame bolts with your supplied drum key, to
reduce movement.
3. Place cymbal poles/Hi-Hat stand and L shape drum arms on the drum frame as illustrated.
4. Fix the mesh drum pads to the L arms. The snare pad is a larger 10?pad.
5.Place the cymbals on top of the cymbal poles and fasten with the cymbal nuts and felt
washer above the cymbal. Do not over tighten, the cymbal should have slight movement and not
be rigid.
*note: The Hi-Hat Cymbal pad is different to the Crash and Ride cymbal pads, please pay close
attention to the labels on the underside of the cymbal pads.
6.Place the sound module in the remaining frame bracket either side of the Hi-Hat cymbal.
*note: It is ideal for younger drummers to have the module to the front of the frame so that the Hi-
Hat is closer to reach. For adults the Hi-Hat and Module position can be reversed to give a much
larger playing area.
7.Place the bass tower on the floor to your required position, usually under TOM2 position.
8.Adjust the Hi-Hat stand floor spikes, so the Hi-Hat stand grip to your carpet or rug to reduce
2
movement.
Cymbal pole
Hi-Hat stand
Snare arm
Frame bolts
L shape arm
Cymbal pole
Bekijk gratis de handleiding van Carlsbro CSD45M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carlsbro |
| Model | CSD45M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3662 MB |
