Carlsbro CSD35M handleiding
Handleiding
Je bekijkt pagina 24 van 32
Trouble shooting
Problem
Reason or solution
No sound from headphones
1. Make sure the volume control is set correctly and turn the volume
control clockwise to its full position."
"
2. Check that the headphones are connected to one of the 3.5mm 1/8”
headphone sockets without the use of any adaptors."
"
3. Test the headphones in another device to check that the headphones
are working correctly.
No sound from amplifier or
sound system
1. Make sure the volume control is set correctly and turn the volume
control clockwise to its full position.!
"
2. Check that the cables are connected to the module L and R output
sockets and the other end of the cables are connected to your amplifier
or sound system inputs.!
Make sure the cables used are mono instrument cables, not speaker
cables or TRS/Stereo cables.
No sound from a drum pad
1. Check that the labelled cable is connected to the correct pad or pedal,
reference Connecting Drum Pads.!
"
2. Check that local setting is set to on ‘Lon’, reference Trigger Settings.!
3. Check that the corresponding pad voice volume is not set to 0, ‘L00’.
reference Voice Settings.!
4. Test the suspect pad or pedal with a similar pad or pedal cable,
[Cymbals], [Mesh pads], [Pedals].!
5. Check the main loom connection on the underside of the sound
module. Remove and refit making sure the locating screws are fully
tightened this should be 4 full turns.
No sound from Bass Drum
Check bass drum trigger settings selection type (Bd?) matches your
bass drum hardware. Reference page 18
No sound from Hi-Hat
Check Hi-Hat trigger settings selection type (HH?) matches your Hi-Hat
hardware. Reference page 17
No sound on metronome
Check that metronome volume is not 0. Reference page 13
No sound on DEMO SONG
Check that song volume is not 0. Reference page 12
There is no signal to MIDI
communication devices
1. Check whether the USB cable used is connected to the USB OUTPUT
socket and not the UPDATE socket.!
"
2. Verify the computer software communication channel is set to channel
10.!
"
3. Verify the software audio input and also individual MIDI track input is
set to a USB MIDI input.!
"
4. Test the USB cable in another device to check for damage.
Module unresponsive
1. Press EXIT button.!
2. Switch power off and back on.
Unable to resolve above
1. Perform factory reset.!
2. Check for software update.!
3. Contact your place of purchase for further assistance.
23
Bekijk gratis de handleiding van Carlsbro CSD35M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carlsbro |
| Model | CSD35M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5345 MB |
