Carlsbro CSD35M handleiding
Handleiding
Je bekijkt pagina 12 van 32
Connect to amplifier or sound system
!
1.Make sure the volume on the sound module and audio system or amplifier are turned down.!
2.Connect two mono 6.35mm (1/4”) instrument cables to the Left and Right output sockets.!
3.Connect the opposite ends of these cables to your audio system or amplifier inputs.!
4.If your amplifier or sound system only has one input, you can use one mono 6.35mm (1/4”)
instrument cable from the L/MONO socket, however you will not get the full effect and quality of
the drums. !
5.Volume is controlled by the VOLUME control on the sound module and also the volume control
for your system or amplifier.!
6.For best quality and ease, turn the module volume to full and adjust your amplifier volume to
your preference.!
*note: It is advised to use an electronic drum amplifier to get the best possible sound. The
CSD35M has been designed to work perfectly with the Carlsbro EDA series of drum amplifiers.
Contact your Local Carlsbro retailer or distributor for further information and availability on these
products.!
Connect to audio playback device
!
Connect the output of your audio device to the AUX INPUT 3.5mm (1/8”) stereo connector.&The
volume should be adjusted on the audio device so the input signal can be mixed with the volume
of the drums.&!
11
Bekijk gratis de handleiding van Carlsbro CSD35M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carlsbro |
| Model | CSD35M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5345 MB |
