Carlsbro CSD25M handleiding
Handleiding
Je bekijkt pagina 23 van 32
Trouble shooting
Problem
Reason or solution
No sound from
headphones
1. Make sure the volume control is set correctly and turn the
volume control clockwise to its full position."
"
2. Check that the headphones are connected to one of the 3.5mm
1/8” headphone sockets without the use of any adaptors."
"
3. Test the headphones in another device to check that the
headphones are working correctly.
No sound from amplifier or
sound system
1. Make sure the volume control is set correctly and turn the
volume control clockwise to its full position.!
"
2. Check that the cables are connected to the module L and R
output sockets and the other end of the cables are connected to
your amplifier or sound system inputs.!
Make sure the cables used are mono instrument cables, not
speaker cables or TRS/Stereo cables.
No sound from a drum
pad
1. Check that the labelled cable is connected to the correct pad
or pedal, reference Connecting Drum Pads.!
"
2. Check that local setting is set to on ‘Lon’, reference Trigger
Settings.!
3. Check that the corresponding pad voice volume is not set to 0,
‘L00’. reference Voice Settings.!
4. Test the suspect pad or pedal with a similar pad or pedal cable,
[Cymbals], [Mesh pads], [Pedals].!
5. Check the main loom connection on the underside of the
sound module. Remove and refit making sure the locating screws
are fully inserted and tightened.
No sound from Bass Drum
Check bass drum trigger settings selection type (Bd?) matches
your bass drum hardware. Reference page 18
No sound from Hi-Hat
Check Hi-Hat trigger settings selection type (HH?) matches your
Hi-Hat hardware. Reference page 17
No sound on metronome
Check that metronome volume is not 0. Reference page 13
No sound on DEMO
SONG
Check that song volume is not 0. Reference page 12
There is no signal to MIDI
communication devices
1. Check whether the USB cable used is connected to the USB
OUTPUT socket and not the UPDATE socket.!
"
2. Verify the computer software communication channel is set to
channel 10.!
"
3. Verify the software audio input and also individual MIDI track
input is set to a USB MIDI input.!
"
4. Test the USB cable in another device to check for damage.
Module unresponsive
1. Switch power off and back on.!
2. Press EXIT button.
Unable to resolve above
1. Perform factory reset.!
2. Check for software update.!
3. Contact your place of purchase for further assistance.
22
Bekijk gratis de handleiding van Carlsbro CSD25M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carlsbro |
| Model | CSD25M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5159 MB |
