Carel Hecu handleiding
Handleiding
Je bekijkt pagina 7 van 60
7
Hecu +0300023EN rel. 1.2 - 14.12.2021
1. INTRODUCTION
1.1 General features
Hecu is a control system for complete management of condensing
units fi tted with BLDC compressors. The serial connection between
the condensing unit and the evaporators controlled by the MPXPRO
represents one of the main features of this solution, contributing to
the energy effi ciency and reliability of the entire system. The control
board is designed for DIN rail assembly and is fi tted with plug-in screw
terminals, as well as incorporating a driver for managing two electronic
expansion valves. Hecu sistema can manage both medium- and low-
temperature applications. The main unit can communicate with up to 5
evaporators. A user terminal (PGDe or pLDpro) is also available for service
or commissioning the system.
Main features:
• Management of medium- or low-temperature applications;
• Modulation of cooling capacity by BLDC compressor with inverter;
• Management of a fi xed-speed backup compressor;
• Management of two modulating fans;
• Card with built-in driver for CAREL unipolar valves;
• Serial communication with evaporators (max 5);
• RS485 serial for BMS;
• Floating suction pressure set point;
• Floating condensing pressure set point;
• Advanced algorithm for calibrated oil injection to the compressor;
• Advanced algorithm for calibrated liquid or vapour injection to the
compressor;
• Oil speed boost for oil return to the compressor;
• Oil recovery washing for oil return to the compressor;
• Vast confi guration of defrost functions;
• Suction and discharge superheat control;
• Ample confi guration of alarms.
1.2 Components and accessories
Part number Description
A ECU70SS0A0 Hecu controller, 230 Vac, RTC, 2 unipolar EEV, 1 SSR,
connector kit, no BMS, FLSMTDMCUSU
A ECU70SS0B0 Hecu controller, 230 Vac, RTC, 2 unipolar EEV, 1 SSR,
connector kit, no BMS, with plastic cover, FLSMTDMCUSU
A PSD1035420 POWER+ 35 A, 380415 VAC 3PH, IP20
A PSD1040420 POWER+ 35 A, 380415 VAC 3PH, IP20
A PS20018404100 Power+ 18 A, 380-415 Vac 3PH, IP20/IP44
A PS20024404100 Power+ 24 A, 380-415 Vac 3PH, IP20/IP44
A PSACH10100 DC choke 2 Mh for PSD 18A
A PSACH10100 DC choke 1.6 Mh for PSD 24A
A E2V09ZSFA0 E2V09 smart with integrated orifi ce 12-12 ODF with sight
glass - W/O stator coil
A E2V09FSFC0 Electronic expansion valve E2V09F 12-12 ODF W/O stator
M E2VSTA03*0 Unipolar stator coil with cable *m
M SPKT00**P0 Pressure transducer 0-5V sealed gage 7/16 inch female
M SPKC00*310 3-wire AWG cable l=*m for SPKT IP67
M NTC030HT41 NTC HT sensor (stainless steel cap 6x50mm) IP55 0T150 3M
M NTC030HF01 NTC HF sensor IP67 -50T90 strap-on l=3m pack of 10 pcs
M NTC015WH01 NTC WH sensor, IP68 -50T105 1.5 m cable
A PGDEH31FX0 pGDe terminal Hecu logo, pLAN version
A PLD00GFP00 PLDPro LCD neutral, 132x64 pixels, pLAN version
M S90CONN00* Connection cable between terminal and pCO2, l=*m
O PCOS004850 Opto-isolated RS485 serial connection card for pCO sistema
O PCOS00S030 Fastening bracket for RS485/LON/RS232 serial card
Tab. 1.a
Key:
M
mandatory
A mandatory / alternative
O optional
Hecu system example
Supervisor
RS485 max 5 unit
Fig. 1.a
Bekijk gratis de handleiding van Carel Hecu, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carel |
| Model | Hecu |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10743 MB |
