Carel Hecu handleiding
Handleiding
Je bekijkt pagina 57 van 60
57
Hecu +0300023EN rel. 1.2 - 14.12.2021
Errors after pressing START
+start+ +buzzer
fl ashing and
buzzer intermittent
Write operation failed
+start+ +buzzer
fl ashing and
buzzer intermittent
Read operation failed
+start+ +buzzer
fl ashing and
buzzer intermittent
Read logs operation failed
+ +
steady +
fl ashing
Incompatibility between log
confi guration and pCO HW
(no fl ash memory). This error
does not prevent writing other
fi les.
+
steady Insuffi cient space to read logs
fl ashing Generic error
Tab. 9.d
pCOmanager: operating instructions
pCO Manager is a program that manages all of confi guration, debugging
and maintenance operations on CAREL pCO Sistema devices. It can be
installed as a stand-alone program or as part of the 1tool programming
environment.
Installing pCO Manager
Go to http://ksa.carel.com and, in section pCO System, select pCO_
manager. After accepting the general terms and conditions of the
software’s free use licence, a window will open for downloading the
pCO_manager.zip fi le. Install the program on your computer.
Connecting the PC to the pCO controller
Connect a cable with USB/RS485 converter to the USB port on the
computer, and connect the converter to a telephone cable plugged into
the pLAN port of the pCO.
USB
CVSTDUTLF0
USB
U
S
B
C
VSTDUTLF0
power supply
Fig. 9.c
On opening, pCO Manager will display a screen showing the connection
settings in the top right-hand corner. Choose:
1. “connessione locale” [local connection];
2. baud rate: Auto;
3. “ricerca dispositivo” [fi nd device]: Auto (pLAN).
As for the port number, follow the Wizard’s instructions for the port to be
identifi ed automatically (e.g. COM4).
Fig. 9.d
Switch the controller off and then on again and use the Connect
command to establish the connection. When the connection is
established the fl ashing message “ONLINE” will appear at the bottom left
of the screen.
Fig. 9.e
Installing the application program
•
Select the directory containing the application program fi les and click
“Upload” to upload the program to the pCO controller.
Fig. 9.f
Commissioning
•
Using the mouse, select “Commissioning” at the bottom left.
A new work environment will appear.
Fig. 9.g
• Click “confi gura dispositivo” [confi gure device] to display all the
application variables. The variables can be selected according to the
categories that appear at the bottom.
Fig. 9.h
Setting a parameter
Select the parameter category and then the parameter to be set. The
parameter (e.g. recovery.recovery_type) will be highlighted in blue.
Fig. 9.i
1. Double-click the column marked letto [read]. A window will ne
shown for entering the new value of the parameter.
Bekijk gratis de handleiding van Carel Hecu, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Carel |
| Model | Hecu |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10743 MB |
