Caple WMI3100 handleiding
Handleiding
Je bekijkt pagina 62 van 64
62 Instruction manual WMi3100 Please keep this instruction manual for future reference
TROUBLE
CODE
POSSIBLE FAULT WHAT TO DO
E01
The door of your machine is not
shut properly.
Shut the door properly until you hear a click. If your
machine persists to indicate fault, turn off your machine,
unplug it and contact Caple Service.
E02
The water pressure or the water
level inside the machine may
be low.
Check the tap is fully turned on. Mains water may be cut-
off. If the problem still continues, your machine will stop
after a while automatically. Unplug the machine, turn off
your tap and contact Caple Service.
E03
The pump is faulty or pump
lter is clogged or electrical
connection of the pump is faulty.
Clean the pump lter. If the problem persists, contact
Caple Service. [*]
E04
Your machine has excessive
amount of water.
Your machine will discharge water by itself. Once the
water has drained, turn off your machine and unplug it.
Turn off the tap and contact Caple Service.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your Washing Machine is equipped with a built-in fault detection system, indicated by
a combination of ashing wash operation lights. The most common failure codes are
shown below.
[*] See the chapter regarding maintenance and cleaning of your machine.
The minimum period which spare parts must be supplied for a washer dryer is 10 years.
Bekijk gratis de handleiding van Caple WMI3100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | WMI3100 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6400 MB |