Caple WMI3100 handleiding
Handleiding
Je bekijkt pagina 37 van 64
37Instruction manual WMi3100Please keep this instruction manual for future reference
6. OPERATING YOUR MACHINE
Press the Start/Pause button to start a selected programme or pause an active one.
7.
REMOVING LAUNDRY
Your machine will stop by itself as soon as the programme you have selected nishes.
“End” will ash on the electronic
display and 3 tones will sound.
8.
MAINTENANCE
1.
It is recommended that you clean your pump lter once every 2 months.
2. It is recommended that you clean your detergent drawer once every
2 months.
3. It is recommended that you clean the lter on your water inlet valve
once every 2 months.
4. Clean the lter at the end of the valve every 2 months.
Press the Start/Pause button to start
The display panel shows the washing delay timer (if set), temperature selection, spin speed,
any additional functions selected. The display panel shows “End” when the selected programme is complete.
The display panel also indicates if a fault has occurred with your machine.
1. Programme Dial
2. Electronic Display
3. Water Temperature Adjustment Button
4. RPM Speed Adjustment Button
5. Delayed Start Button
6. Rapid Wash Button
7. Easy Iron Button
8. Start/Pause Button
Press the Start/Pause button to start
a selected programme or pause an
active one.
Your machine will stop by
itself as soon as the
programme you have
selected finishes.
“End” will flash on the
electronic display.
1- It is recommended that you clean your pump filter once
every 2 months.
2- It is recommended that you clean your detergent drawer
once every 2 months.
3- It is recommended that you clean the filter on your water
inlet valve once every 2 months.
4- Clean the filter at the end of the valve every 2 months.
If the washing machine does
not spin, the unbalanced
load system may have been
activated.
The unbalanced load control
prevent damage to the drum.
The spinning operation will
resume once the load has
been evenly distributed.
9
The display panel shows the washing delay timer (if set), temperature selection, spin speed,
any additional functions selected. The display panel shows “End” when the selected programme is complete.
The display panel also indicates if a fault has occurred with your machine.
1. Programme Dial
2. Electronic Display
3. Water Temperature Adjustment Button
4. RPM Speed Adjustment Button
5. Delayed Start Button
6. Rapid Wash Button
7. Easy Iron Button
8. Start/Pause Button
Press the Start/Pause button to start
a selected programme or pause an
active one.
Your machine will stop by
itself as soon as the
programme you have
selected finishes.
“End” will flash on the
electronic display.
8
1- It is recommended that you clean your pump filter once
every 2 months.
2- It is recommended that you clean your detergent drawer
once every 2 months.
3- It is recommended that you clean the filter on your water
inlet valve once every 2 months.
4- Clean the filter at the end of the valve every 2 months.
If the washing machine does
not spin, the unbalanced
load system may have been
activated.
The unbalanced load control
prevent damage to the drum.
The spinning operation will
resume once the load has
been evenly distributed.
9
The display panel shows the washing delay timer (if set), temperature selection, spin speed,
any additional functions selected. The display panel shows “End” when the selected programme is complete.
The display panel also indicates if a fault has occurred with your machine.
1. Programme Dial
2. Electronic Display
3. Water Temperature Adjustment Button
4. RPM Speed Adjustment Button
5. Delayed Start Button
6. Rapid Wash Button
7. Easy Iron Button
8. Start/Pause Button
Press the Start/Pause button to start
a selected programme or pause an
active one.
Your machine will stop by
itself as soon as the
programme you have
selected finishes.
“End” will flash on the
electronic display.
1- It is recommended that you clean your pump filter once
every 2 months.
2- It is recommended that you clean your detergent drawer
once every 2 months.
3- It is recommended that you clean the filter on your water
inlet valve once every 2 months.
4- Clean the filter at the end of the valve every 2 months.
If the washing machine does
not spin, the unbalanced
load system may have been
activated.
The unbalanced load control
prevent damage to the drum.
The spinning operation will
resume once the load has
been evenly distributed.
9
The display panel shows the washing delay timer (if set), temperature selection, spin speed,
any additional functions selected. The display panel shows “End” when the selected programme is complete.
The display panel also indicates if a fault has occurred with your machine.
1. Programme Dial
2. Electronic Display
3. Water Temperature Adjustment Button
4. RPM Speed Adjustment Button
5. Delayed Start Button
6. Rapid Wash Button
7. Easy Iron Button
8. Start/Pause Button
Press the Start/Pause button to start
a selected programme or pause an
active one.
Your machine will stop by
itself as soon as the
programme you have
selected finishes.
“End” will flash on the
electronic display.
1- It is recommended that you clean your pump filter once
every 2 months.
2- It is recommended that you clean your detergent drawer
once every 2 months.
3- It is recommended that you clean the filter on your water
inlet valve once every 2 months.
4- Clean the filter at the end of the valve every 2 months.
If the washing machine does
not spin, the unbalanced
load system may have been
activated.
The unbalanced load control
prevent damage to the drum.
The spinning operation will
resume once the load has
been evenly distributed.
9
The display panel shows the washing delay timer (if set), temperature selection, spin speed,
any additional functions selected. The display panel shows “End” when the selected programme is complete.
The display panel also indicates if a fault has occurred with your machine.
1. Programme Dial
2. Electronic Display
3. Water Temperature Adjustment Button
4. RPM Speed Adjustment Button
5. Delayed Start Button
6. Rapid Wash Button
7. Easy Iron Button
8. Start/Pause Button
Press the Start/Pause button to start
a selected programme or pause an
active one.
Your machine will stop by
itself as soon as the
programme you have
selected finishes.
“End” will flash on the
electronic display.
1- It is recommended that you clean your pump filter once
every 2 months.
2- It is recommended that you clean your detergent drawer
once every 2 months.
3- It is recommended that you clean the filter on your water
inlet valve once every 2 months.
4- Clean the filter at the end of the valve every 2 months.
If the washing machine does
not spin, the unbalanced
load system may have been
activated.
The unbalanced load control
prevent damage to the drum.
The spinning operation will
resume once the load has
been evenly distributed.
9
If the washing machine does not spin, the unbalanced load system may have
been activated.
The unbalanced load control system will try to distribute your laundry evenly to prevent
damage to the drum.
The spinning operation will resume once the load has been evenly distributed.
Bekijk gratis de handleiding van Caple WMI3100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | WMI3100 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6400 MB |