Caple WMI3100 handleiding
Handleiding
Je bekijkt pagina 32 van 64
32 Instruction manual WMi3100 Please keep this instruction manual for future reference
2x
2x
2x
2x
Mount the two door magnet blocks, using the nal 2 machine thread screws
2x
2x
2x
2x
Mount the two door magnet blocks, using the nal 2 machine thread screws
Mount the two door magnet blocks, using the nal 2 machine thread screws
[1 per magnet block]
Finally t the kitchen plinth ensuring that you allow easy access to the lter to allow the user
to clean the lter.
Tighten the plastic parts of the
connections by hand. If in any doubt,
consult a qualified plumber.
Water flow with pressure of 0. 1-1 Mpa
will allow your machine to operate at
optimum efficiency (pressure of 0. 1
Mpa means that more than 8 litres of
water per minute will flow through a fully
connections, carefully turn the water
Ensure that the new water inlet hoses
are not trapped, kinked, twisted, folded
supply using the supplied new fill hose. Old
Water Discharge Connection
Connect the water drain hose to a
standpipe or to the outlet elbow of
a household sink, using additional
equipment.
Never attempt to extend the water drain
Do not put the water drain hose from
your machine into a container, bucket or
Make sure that the water drain hose is
The water drain hose must be installed
at a maximum height of 100 cm from the
Programme Dial:
dial to select the washing / drying
the programme dial clockwise or
anticlockwise to select the required
programme. Make sure that the dial
is pointing exactly at the selected
Electronic Display
Bekijk gratis de handleiding van Caple WMI3100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | WMI3100 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6400 MB |