Caple WMI3100 handleiding
Handleiding
Je bekijkt pagina 21 van 64
21Instruction manual WMi3100Please keep this instruction manual for future reference
WATER INLET HOSE CONNECTION
The mains cord of your washing
machine is equipped with an earthed
plug. This plug should always be
inserted to an earthed socket of 10
If you do not have a suitable socket and
fuse conforming with this, please ensure
the work is carried out by a qualified
electrician.
We do not take responsibility for
ungrounded equipment.
Operating your machine
with low voltage will cause the life cycle
of your machine to be reduced and its
performance to be restricted.
3.4 Water Inlet Hose Connection
3/4”
10 mm
1
3
2
4
1. Your machine has a
single water inlet connection (cold).
The white capped hose should be
connected to cold water inlet.
To prevent water leaks at the joints,
either 1 or 2 nuts (depending on your
machine’s specifications) are supplied
in the packaging with the hose. Fit these
nuts to the end(s) of the water inlet hose
Connect new water inlet hoses to a ¾ ˝,
Connect the white capped end of the
water inlet hose to the white water inlet
valve on the rear side of the machine.
Tighten the plastic parts of the
connections by hand. If in any doubt,
consult a qualified plumber.
Water flow with pressure of 0. 1-1 Mpa
will allow your machine to operate at
optimum efficiency (pressure of 0. 1
Mpa means that more than 8 litres of
water per minute will flow through a fully
connections, carefully turn the water
Ensure that the new water inlet hoses
are not trapped, kinked, twisted, folded
Your Washing Machine
supply using the supplied new fill hose. Old
hoses must not be reused.
1. Your machine has a single water inlet connection [cold]. The white capped hose should be
connected to cold water inlet.
› To prevent water leaks at the joints, either 1 or 2 nuts [depending on your machine’s
specications] are supplied in the packaging with the hose. Fit these nuts to the end[s] of
the water inlet hose that connect to the water supply.
2. Connect new water inlet hoses to a ¾ ˝, threaded tap.
› Connect the white capped end of the water inlet hose to the white water inlet valve on
the rear side of the machine.
› Tighten the plastic parts of the connections by hand. If in any doubt, consult a
qualied plumber.
› Water ow with pressure of 0. 1-1 Mpa will allow your machine to operate at optimum
efciency [pressure of 0. 1 Mpa means that more than 8 litres of water per minute will
ow through a fully opened tap].
Bekijk gratis de handleiding van Caple WMI3100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | WMI3100 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6400 MB |