Caple Di655 handleiding
Handleiding
Je bekijkt pagina 12 van 60
Instruction manual Di65512 Please keep this instruction manual for future reference
CONTROL PANEL
Programme
1
2
3
4
5
7
5 6
6
8
7
9
10
BUTTON OPERATION
1
POWER
Press the button to turn on your dishwasher, the screen lights up.
2 PROGRAMME
Press the “
Water Softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which
would have a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed
based on the hardness of the water used. This is intended to optimise and customise
the level of salt consumption.
1.Open the door and switch on the appliance
2. PProgram “ ”
3.Program
“ ”
4.Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup mode.
;
ress the button for more than 5 seconds to start the water softener
set model within 60 seconds after the appliance was switched on;
Press the button to select the proper set according to your local
environment, the sets will change in the following sequence:
H3->H4->H5->H6->H1->H2->H3;
Please follow the steps below for adjustment in salt consumption.
dH=1.25Clarke=1.78fH=0.178mmol/l
°
°
°
1
The manufactory setting: H3
Contact your local water board for information on the hardness of your water supply.
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
German
dH
German
dH
Salt consumption
(gram/cycle)
Salt consumption
(gram/cycle)
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
H1
H2
H3
H4
H5
H6
0
9
12
20
30
60
French
fH
French
fH
Mmol/lMmol/l
Water softener levelWater softener level
British
Clarke
British
Clarke
WATER HARDNESS
7
” or “
Water Softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which
would have a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed
based on the hardness of the water used. This is intended to optimise and customise
the level of salt consumption.
1.Open the door and switch on the appliance
2. PProgram “ ”
3.Program
“ ”
4.Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup mode.
;
ress the button for more than 5 seconds to start the water softener
set model within 60 seconds after the appliance was switched on;
Press the button to select the proper set according to your local
environment, the sets will change in the following sequence:
H3->H4->H5->H6->H1->H2->H3;
Please follow the steps below for adjustment in salt consumption.
dH=1.25Clarke=1.78fH=0.178mmol/l
°
°
°
1
The manufactory setting: H3
Contact your local water board for information on the hardness of your water supply.
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
German
dH
German
dH
Salt consumption
(gram/cycle)
Salt consumption
(gram/cycle)
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
H1
H2
H3
H4
H5
H6
0
9
12
20
30
60
French
fH
French
fH
Mmol/lMmol/l
Water softener levelWater softener level
British
Clarke
British
Clarke
WATER HARDNESS
7
” button to select a programme, and the corresponding indicator
will be lit.
3 DELAY +/ -
Press the “+”button to add the delay time or press the “-”button to decrease the delay
time,maximum24hoursdelaycanbedened.
4 FUNCTION
Press the button to select a function, corresponding indicator will be lit.
5 ALT
Press the button to select either upper basket or lower basket loaded, and the response
indicators will be lit.
Bekijk gratis de handleiding van Caple Di655, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | Di655 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4693 MB |
