Handleiding
Je bekijkt pagina 17 van 19
Instruction manual C8242C Instruction manual C8242C
32 33
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
TECHNICAL SPECIFICATION
Weight and dimensions are approximate. Because we continually strive to improve our products
we may change specications and designs without prior notice.
MODEL CODE C8242C
Cooking zones 4 zones
Supply voltage 220-240V~, or 380-415V 3N~ - 50 or 60Hz
Installed electric power 6500-7800W
Product size LxWxH [mm] 770 X 520 X 55
Building in dimensions AxB [mm] 754 X 499
Product information for power consumption and time to reach the applicable low power mode:
MODE POWER
CONSUMPTION
If there is no operation after turning the hob on,
the hob will automatically enter Off mode after the
following amount of time
Off mode/standby mode/
networked standby
0.5W 1 min
FAILURE DISPLAY AND ERROR CODES
The induction hob is equipped with a self diagnostic function. With this test the technician is able
to check the function of several components without disassembling or dismounting the hob from
the working surface.
PROBLEM POSSIBLE CAUSES WHAT TO DO
E0 Zero Error. Please contact Caple service
E1
Ceramic plate temperature sensor failure -
open circuit.
Please contact Caple service
E2
Ceramic plate temperature sensor failure -
short circuit.
Please contact Caple service
E7 Ceramic plate temperature sensor failure. Please contact Caple service
C1
Temperature sensor of the ceramic glass
plate Is high.
Please restart after the hob cools down.
E3
Temperature sensor failure of the NTC -
open circuit.
Please contact Caple service
E4
Temperature sensor failure of the NTC -
short circuit.
Please contact Caple service
EL Supply voltage is below the Rated Voltage.
Please inspect whether power supply is
normal. Power on after the power supply
is normal.
EH Supply voltage is above the Rated Voltage.
EU Communication error. Please contact Caple service
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the hob.
Caple Service can be contacted by telephone on
0117 938 1900.
Bekijk gratis de handleiding van Caple C8242C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Caple |
| Model | C8242C |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1484 MB |
