Canon RF 400mm f/2.8 L IS USM handleiding

Lens

Canon

29 pagina's

PDF beschikbaar

Handleiding

ENG-6

Lens mount index

Lens release button Dust cap

1. Attaching and Detaching the Lens

Attaching the Lens

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing

the camera’s lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera's instructions for

details.

 Set the camera’s power switch to OFF when

attaching or detaching the lens.

 After detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

 Contacts that are scratched, soiled, or have

fingerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

 The lens mount has a rubber ring to improve

dust-resistance and water-resistance

performance. This rubber ring may cause

friction marks to appear around the camera’s

lens mount, although this will have no effect on

usage.

 Since the lens is heavier than the camera, turn

the camera when attaching or detaching the

lens. Ensuring that the lens can rest safely on its

own is recommended, such as first mounting it

on a tripod.

 Rubber rings can be replaced at a Canon

Service Center at cost.

Bekijk gratis de handleiding van Canon RF 400mm f/2.8 L IS USM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.