Handleiding
Je bekijkt pagina 128 van 388
Changing the Printer Operation Mode
If necessary, switch between various modes of printer operation.
1. Check whether the printer is on and select Printer settings from Remote UI1.
2.
Change settings
2.
The displayed settings may vary depending on your printer model. Change the displayed settings as
needed.
Print settings - Prevent paper abrasion
The printer can increase the gap between the print head and the paper during high-density printing
to prevent paper abrasion.
Check this check box to prevent paper abrasion.
Custom settings - Detect paper setting mismatch
Custom settings - Detect paper setting mismatch (AirPrint) / Detect paper setting mismatch
(Other)
If the check box is deselected, at the time of printing from PC, you can continue to print without the
message display even if the paper settings set in the print dialog differs from the paper information
configured on the printer.
Ink drying wait time
You can set the length of the printer rest time until printing of the next page begins. The wait time
becomes longer as the value set in the list increases, and shorter as the value decreases.
If the paper gets stained because the next page is ejected before the ink on the printed page dries,
increase the ink drying wait time.
3. Apply the settings3.
Click OK.
The printer operates with the modified settings hereafter.
128
Bekijk gratis de handleiding van Canon Pixma TS6550i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | Pixma TS6550i |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 34950 MB |
