Handleiding
Je bekijkt pagina 13 van 20
13
4 Operation
4-3. Iris operation
The iris can be operated automatically or manually by changing the iris operation mode change-
over switch.
A (Automatic) : Automatic iris operation from the camera.
M (Manual) : Manual iris operation by rotating the iris ring.
4-3-1. Automatic iris operation
Slide the iris operation mode change-over switch to the “A”
position.
The iris ring rotates automatically (driven by a motor in the
drive unit) according to a camera signal.
The video level is automatically adjusted by the camera.
Slide the iris operation mode change-over switch to the “M”
position for performing manual iris operations.
Adjust exposure by rotating the iris ring of the lens manually.
Turn the iris ring.
As viewed from the camera side
C.W. ：closing down
C.C.W. ：opening up
IRIS
A M
• •
T
W
Iris Operation Mode
Change-over Switch
4-3-2. Manual iris operation
NOTE
The iris operation mode change-over switch must be
set to the “M” position before performing manual iris
operations. The lens may be damaged if manual iris
operations are forcibly performed at the “A” position.
Instant auto-iris switch
When the instant auto-iris switch is pressed during manual
iris operation mode, the iris changes to automatic operation
mode while the switch is held down.
M
F
Close
Open
Iris Ring
IRIS
A M
• •
T
W
Instant Auto-Iris Switch
Bekijk gratis de handleiding van Canon KJ20x8.2B KRSD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | KJ20x8.2B KRSD |
| Categorie | Lens |
| Taal | Nederlands |
| Grootte | 2750 MB |
