Handleiding
Je bekijkt pagina 41 van 80
13E
Setting Items Function Selection
DIP Switch Settings
(DIP Switch No. : position)
Turning ON or OFF
the Shuttle-Shot function
ON 1: ON
OFF 1: OFF
Assigning a function
as the RET switch
Return
（
RET
）
2: OFF
Shuttle-Shot
（
Shtl
）
2: ON
Assigning a function
as the VTR switch
VTR-Start/ Stop
（
VTR
）
3: OFF
Shuttle-Shot
（
Shtl
）
3: ON
Spare (Not used.)
4: OFF
：
Factory Settings
1
2
3
4
DIP Switches
ON
Rubber Cap
C. How to set the DIP switches
At the far end of the rubber cap covering the drive unit are the DIP switches which are used for
the settings related to the shuttle-button function.
By setting these switches, the Shtl button functions can be assigned to the VTR switch and RET
switch functions. The shuttle shot function can be set to off if not needed.
1 Turn over the rubber cap.
2 The various function settings available are listed
below. Set the DIP switches to the desired settings.
The switch is ON when it is set to its bottom-side po-
sition and OFF when it is set to its top-side position.
3 Upon completion of the settings, re-set the rubber
cap in place.
↓
↓
Bekijk gratis de handleiding van Canon KJ13x6B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | KJ13x6B |
| Categorie | Lens |
| Taal | Nederlands |
| Grootte | 13990 MB |
