Handleiding
Je bekijkt pagina 203 van 704
Preparing to Print from a Computer
929S-0J6
Make the following preparations for the computer that will be used to print.
Step 1: Installing the Driver to the Computer(P. 193)
Step 2: Using a Driver to Set the Department ID and PIN(P. 193)
Step 3: Conguring the Option Settings of the Machine Using the Driver(P. 193)
Step 1: Installing the Driver to the Computer
Install the printer driver to the computer that will be used to print. Installing Software and Drivers to the
Computer(P. 101)
Using a Print Server in Windows
Use a print server to install the printer driver.
Double-click the shared printer on the print server, and follow the instructions on the scr
een to install the
printer driver.
Displaying a Shared Printer in the Print Server(P. 658)
Changing the Port Type and Number (Windows)
● If the machine is congured not to use LPD or RAW, or if the port number was changed, the settings on the
computer may also have to be changed. Changing the Port Type and Number(P. 198)
If the IP Addr
ess of the Machine Is Changed after Installing the Printer Driver
● In Windo
ws, the r
equir
ed action depends on the port you ar
e using.
-
If you are using an MFNP port, the connection is maintained as long as the machine and computer belong
to the same subnet, so no action is required on the computer.
- If you are using a standard TCP/IP port, you must add a new port.
Adding a Port(P. 196)
If you do not kno
w which port is being used, see the follo
wing:
Viewing the Printer Port(P. 663)
● In macOS, you must r
e-r
egister the machine on the Mac. For details about r
egistering the machine, see the
manual of the driver at the online manual site.
https://oip.manual.canon/
* If you ar
e using DHCP to automatically obtain the IP addr
ess of the machine, the IP addr
ess may be changed
automatically.
Step 2: Using a Driver to Set the Department ID and PIN
When Department ID Management is enabled on the machine, set the Department ID and PIN b
y specifying the
printer driver. Setting the Department ID and PIN on a Computer(P. 335)
* You can skip this step when not using Department ID Management. Proceed to Step 3.
Step 3: Conguring the Option Settings of the Machine Using the Driver
When optional equipment is installed to the machine, you must congure the option settings in the printer driver in
advance.
In Windows, normally, the option settings are congured automatically when the printer driver is installed.
Use the follo
wing procedure to congure the option settings when the option settings have not been congured at
installation, optional equipment has been installed after installation of the printer driver, or when using macOS.
Printing
193
Bekijk gratis de handleiding van Canon imageRUNNER 2224N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageRUNNER 2224N |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 68244 MB |
