Canon imageFORCE C1333P handleiding

550 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 63 van 550
Connecting to a Wireless LAN by Searching for a Router
(Access Point Setup Method)
AU3H-01A
Search for a wireless LAN router (access point) to which to connect, and enter the network key.
When you connect with the access point setup method, the encryption method for WPA/WPA2/WPA3 is set to AES-
CCMP.
When you want to use a different encryption method, connect with the manual setup method. Connecting to a
Wireless LAN by Setting the Details (Manual Setup Method)(P. 57)
Administrator privileges are required to connect to a wireless LAN.
Required Preparations
Prepare the information of the wireless LAN router (SSID or network key) to which you want to connect, and
keep it close by. Wireless LAN Router Information Required for Connection(P. 51)
When connecting to a wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, set
IEEE 802.1X.
Using IEEE 802.1X(P. 236)
1
On the control panel, press [Wi-Fi Settings] in the [Home] screen. [Home]
Screen(P. 96)
The [Select Network] screen is displayed.
If the login screen appears, enter the Administrator ID and PIN, and then press [Log In]. Administrator ID
and PIN(P. 9)
If the message [Do you want to enable Wi-Fi?] appears, press [Yes].
If the message [Could not nd the access point.] appears, check that the router is discoverable.
Cannot
Connect to Wireless LAN(P. 471)
2
Select the SSID of the wireless LAN to which you want to connect.
The Network Key input screen is displayed.
When selecting the SSID of the wireless LAN router supporting WPA-EAP or WPA2-EAP for the security
standard, the message [To connect, the values congured in IEEE 802.1X Settings will be applied.] appears.
Press [OK], and proceed to Step 4.
If you cannot find the wireless LAN router to which you want to connect, check that the router is
discoverable. Cannot Connect to Wireless LAN(P. 471)
3
Enter the network key, and press [Apply].
4
When [Connected.] is displayed on the control panel, press [Close].
When the machine is connected to the wireless LAN, [ ] appears on the [Home] screen and screen of
each function.
5
Wait a few minutes.
Setting Up
55

Bekijk gratis de handleiding van Canon imageFORCE C1333P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCanon
ModelimageFORCE C1333P
CategoriePrinter
TaalNederlands
Grootte49786 MB