Handleiding
Je bekijkt pagina 137 van 149
Could not set the user information because the network settings are incorrect.
Contact the administrator for details.
Status The IP address or host name set in the AMS Printer Driver Add-in is incorrect, or there is a problem in the
network settings.
Remedy Check the IP address/host name settings in the [Set IP Address/Host Name] dialog box and the network
settings, and retrieve the user information again. If you still cannot retrieve the information, contact the
AMS administrator.
Could not set the user information because the device is not responding.
Make sure that the device is turned on and try to set the information again later.
If the same error occurs, contact the administrator for details.
Status
Could not communicate with the device for an unspecied reason. There may be a problem with the
communication environment, such as the network settings or network connection.
Remedy Try setting the user information again after conrming that the power of the device is turned ON and the
LAN cable, etc., is connected correctly. If you still cannot set the user information, contact the AMS
administrator.
Characters that cannot be used have been entered for the Domain Name
[Authentication]. Check the entered characters.
Status
If you are using local device authentication, an authentication server other than [This Device] is selected in
[Authentication]. If you are using Active Directory authentication, invalid characters are used in the
domain name entered in [Authentication].
Remedy If you are using local device authentication, select [This Device] in [Authentication]. If you are using Active
Directory authentication, conrm and enter the correct domain name.
The set user information and obtained restriction information do not match.
Set the user information again.
For Domain Authentication, enter the NetBIOS domain name in [Authentication].
Status
The user information set for the AMS Printer Driver Add-in and the user information set in the retrieved
restriction information does not match.
Remedy Check the user information specied in the [Setup User Names and Passwords for Authentication] dialog
box. Select [This Device] in [Authentication] for local device authentication. Select the NetBIOS domain
name for Active Directory authentication.
The set user information and obtained restriction information do not match.
Set the user information again.
Status
The user information set for the AMS Printer Driver Add-in and the user information set in the retrieved
restriction information does not match.
Troubleshooting
134
Bekijk gratis de handleiding van Canon imageFORCE 6155, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Canon |
| Model | imageFORCE 6155 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 16983 MB |
